<< Chapter < Page Chapter >> Page >
I = I 0 e t / τ     (turning off). size 12{I=I rSub { size 8{0} } e rSup { size 8{ - t/τ} } } {}

(See [link] (c).) In the first period of time τ = L / R size 12{τ=L/R} {} after the switch is closed, the current falls to 0.368 of its initial value, since I = I 0 e 1 = 0 . 368 I 0 size 12{I=I rSub { size 8{0} } e rSup { size 8{ - 1} } =0 "." "368"I rSub { size 8{0} } } {} . In each successive time τ size 12{τ} {} , the current falls to 0.368 of the preceding value, and in a few multiples of τ size 12{τ} {} , the current becomes very close to zero, as seen in the graph in [link] (c).

Calculating characteristic time and current in an RL Circuit

(a) What is the characteristic time constant for a 7.50 mH inductor in series with a 3.00 Ω resistor? (b) Find the current 5.00 ms after the switch is moved to position 2 to disconnect the battery, if it is initially 10.0 A.

Strategy for (a)

The time constant for an RL circuit is defined by τ = L / R size 12{τ=L/R} {} .

Solution for (a)

Entering known values into the expression for τ size 12{τ} {} given in τ = L / R size 12{τ=L/R} {} yields

τ = L R = 7.50 mH 3.00 Ω = 2.50 ms. size 12{τ= { {L} over {R} } = { {7 "." "50"" mH"} over {3 "." "00 " %OMEGA } } =2 "." "50"" ms"} {}

Discussion for (a)

This is a small but definitely finite time. The coil will be very close to its full current in about ten time constants, or about 25 ms.

Strategy for (b)

We can find the current by using I = I 0 e t / τ size 12{I=I rSub { size 8{0} } e rSup { size 8{ - t/τ} } } {} , or by considering the decline in steps. Since the time is twice the characteristic time, we consider the process in steps.

Solution for (b)

In the first 2.50 ms, the current declines to 0.368 of its initial value, which is

I = 0 . 368 I 0 = ( 0 . 368 ) ( 10.0 A ) = 3 . 68 A at  t = 2 . 50  ms.

After another 2.50 ms, or a total of 5.00 ms, the current declines to 0.368 of the value just found. That is,

I = 0 . 368 I = ( 0 . 368 ) ( 3.68 A ) = 1 . 35  A at  t = 5 . 00  ms. alignl { stack { size 12{ { {I}} sup { ' }=0 "." "368"I= \( 0 "." "368" \) \( 3 "." "68"" A" \) } {} #size 12{" "=1 "." "35"" A at "t=5 "." "00"" ms"} {} } } {}

Discussion for (b)

After another 5.00 ms has passed, the current will be 0.183 A (see [link] ); so, although it does die out, the current certainly does not go to zero instantaneously.

Got questions? Get instant answers now!

In summary, when the voltage applied to an inductor is changed, the current also changes, but the change in current lags the change in voltage in an RL circuit . In Reactance, Inductive and Capacitive , we explore how an RL circuit behaves when a sinusoidal AC voltage is applied.

Section summary

  • When a series connection of a resistor and an inductor—an RL circuit—is connected to a voltage source, the time variation of the current is
    I = I 0 ( 1 e t / τ )     (turning on). size 12{I=I rSub { size 8{0} } \( 1 - e rSup { size 8{ - t/τ} } \) } {}
    where I 0 = V / R size 12{I rSub { size 8{0} } =V/R} {} is the final current.
  • The characteristic time constant τ size 12{τ} {} is τ = L R size 12{τ= { {L} over {R} } } {} , where L is the inductance and R is the resistance.
  • In the first time constant τ size 12{τ} {} , the current rises from zero to 0 . 632 I 0 size 12{0 "." "632"I rSub { size 8{0} } } {} , and 0.632 of the remainder in every subsequent time interval τ size 12{τ} {} .
  • When the inductor is shorted through a resistor, current decreases as
    I = I 0 e t / τ     (turning off). size 12{I=I rSub { size 8{0} } e rSup { size 8{ - t/τ} } } {}
    Here I 0 size 12{I rSub { size 8{0} } } {} is the initial current.
  • Current falls to 0 . 368 I 0 size 12{0 "." "368"I rSub { size 8{0} } } {} in the first time interval τ size 12{τ} {} , and 0.368 of the remainder toward zero in each subsequent time τ size 12{τ} {} .

Problem exercises

If you want a characteristic RL time constant of 1.00 s, and you have a 500 Ω resistor, what value of self-inductance is needed?

500 H

Got questions? Get instant answers now!

Your RL circuit has a characteristic time constant of 20.0 ns, and a resistance of 5.00 MΩ . (a) What is the inductance of the circuit? (b) What resistance would give you a 1.00 ns time constant, perhaps needed for quick response in an oscilloscope?

Got questions? Get instant answers now!

A large superconducting magnet, used for magnetic resonance imaging, has a 50.0 H inductance. If you want current through it to be adjustable with a 1.00 s characteristic time constant, what is the minimum resistance of system?

50.0 Ω

Got questions? Get instant answers now!

Verify that after a time of 10.0 ms, the current for the situation considered in [link] will be 0.183 A as stated.

Got questions? Get instant answers now!

Suppose you have a supply of inductors ranging from 1.00 nH to 10.0 H, and resistors ranging from 0.100 Ω to 1.00 MΩ . What is the range of characteristic RL time constants you can produce by connecting a single resistor to a single inductor?

1 . 00 × 10 –18 s size 12{1 "." "00" times "10" rSup { size 8{"-15"} } " s"} {} to 0.100 s

Got questions? Get instant answers now!

(a) What is the characteristic time constant of a 25.0 mH inductor that has a resistance of 4.00 Ω ? (b) If it is connected to a 12.0 V battery, what is the current after 12.5 ms?

Got questions? Get instant answers now!

What percentage of the final current I 0 flows through an inductor L size 12{L} {} in series with a resistor R size 12{R} {} , three time constants after the circuit is completed?

95.0%

Got questions? Get instant answers now!

The 5.00 A current through a 1.50 H inductor is dissipated by a 2.00 Ω resistor in a circuit like that in [link] with the switch in position 2. (a) What is the initial energy in the inductor? (b) How long will it take the current to decline to 5.00% of its initial value? (c) Calculate the average power dissipated, and compare it with the initial power dissipated by the resistor.

Got questions? Get instant answers now!

(a) Use the exact exponential treatment to find how much time is required to bring the current through an 80.0 mH inductor in series with a 15.0 Ω resistor to 99.0% of its final value, starting from zero. (b) Compare your answer to the approximate treatment using integral numbers of τ size 12{τ} {} . (c) Discuss how significant the difference is.

(a) 24.6 ms

(b) 26.7 ms

(c) 9% difference, which is greater than the inherent uncertainty in the given parameters.

Got questions? Get instant answers now!

(a) Using the exact exponential treatment, find the time required for the current through a 2.00 H inductor in series with a 0.500 Ω resistor to be reduced to 0.100% of its original value. (b) Compare your answer to the approximate treatment using integral numbers of τ size 12{τ} {} . (c) Discuss how significant the difference is.

Got questions? Get instant answers now!

Questions & Answers

material that allows electric current to pass through
Deng Reply
material which don't allow electric current is called
Deng
insulators
Covenant
how to study physic and understand
Ewa Reply
what is conservative force with examples
Moses
what is work
Fredrick Reply
the transfer of energy by a force that causes an object to be displaced; the product of the component of the force in the direction of the displacement and the magnitude of the displacement
AI-Robot
why is it from light to gravity
Esther Reply
difference between model and theory
Esther
Is the ship moving at a constant velocity?
Kamogelo Reply
The full note of modern physics
aluet Reply
introduction to applications of nuclear physics
aluet Reply
the explanation is not in full details
Moses Reply
I need more explanation or all about kinematics
Moses
yes
zephaniah
I need more explanation or all about nuclear physics
aluet
Show that the equal masses particles emarge from collision at right angle by making explicit used of fact that momentum is a vector quantity
Muhammad Reply
yh
Isaac
A wave is described by the function D(x,t)=(1.6cm) sin[(1.2cm^-1(x+6.8cm/st] what are:a.Amplitude b. wavelength c. wave number d. frequency e. period f. velocity of speed.
Majok Reply
what is frontier of physics
Somto Reply
A body is projected upward at an angle 45° 18minutes with the horizontal with an initial speed of 40km per second. In hoe many seconds will the body reach the ground then how far from the point of projection will it strike. At what angle will the horizontal will strike
Gufraan Reply
Suppose hydrogen and oxygen are diffusing through air. A small amount of each is released simultaneously. How much time passes before the hydrogen is 1.00 s ahead of the oxygen? Such differences in arrival times are used as an analytical tool in gas chromatography.
Ezekiel Reply
please explain
Samuel
what's the definition of physics
Mobolaji Reply
what is physics
Nangun Reply
the science concerned with describing the interactions of energy, matter, space, and time; it is especially interested in what fundamental mechanisms underlie every phenomenon
AI-Robot
Practice Key Terms 1

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, College physics. OpenStax CNX. Jul 27, 2015 Download for free at http://legacy.cnx.org/content/col11406/1.9
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'College physics' conversation and receive update notifications?

Ask