<< Chapter < Page Chapter >> Page >
W = V 1 V 2 p d V = V 1 V 2 ( n R T V ) d V .
The figure is a plot of p on the vertical axis as a function of V on the horizontal axis. Two pressures are indicated on the vertical axis, p 1 and p 2, with p 1 greater than p 2. Two volumes are indicated on the horizontal axis, V 1 and V 2, with V 1 less than V 2.  Four points, A, B, C, and D are labeled. Point A is at V 1, p 1. Point B is at V 2, p 1. Point C is at V 2, p 2. Point D is at V 1, p 2. A straight horizontal line connects A to B, with an arrow pointing to the right indicating the direction from A to B. A straight vertical line connects B to C, with an arrow downward indicating the direction from B to C. A straight vertical line connects A to D, with an arrow pointing downward indicating the direction from A to D. A straight horizontal line connects D to C, with an arrow to the right indicating the direction from D to C. Finally, a curved line connects A to C with an arrow pointing in the direction from A to C.
The paths ABC , AC , and ADC represent three different quasi-static transitions between the equilibrium states A and C .

The expansion is isothermal, so T remains constant over the entire process. Since n and R are also constant, the only variable in the integrand is V , so the work done by an ideal gas in an isothermal process is

W = n R T V 1 V 2 d V V = n R T ln V 2 V 1 .

Notice that if V 2 > V 1 (expansion), W is positive, as expected.

The straight lines from A to B and then from B to C represent a different process. Here, a gas at a pressure p 1 first expands isobarically (constant pressure) and quasi-statically from V 1 to V 2 , after which it cools quasi-statically at the constant volume V 2 until its pressure drops to p 2 . From A to B , the pressure is constant at p , so the work over this part of the path is

W = V 1 V 2 p d V = p 1 V 1 V 2 d V = p 1 ( V 2 V 1 ) .

From B to C , there is no change in volume and therefore no work is done. The net work over the path ABC is then

W = p 1 ( V 2 V 1 ) + 0 = p 1 ( V 2 V 1 ) .

A comparison of the expressions for the work done by the gas in the two processes of [link] shows that they are quite different. This illustrates a very important property of thermodynamic work: It is path dependent . We cannot determine the work done by a system as it goes from one equilibrium state to another unless we know its thermodynamic path. Different values of the work are associated with different paths.

Isothermal expansion of a van der waals gas

Studies of a van der Waals gas require an adjustment to the ideal gas law that takes into consideration that gas molecules have a definite volume (see The Kinetic Theory of Gases ). One mole of a van der Waals gas has an equation of state

( p + a V 2 ) ( V b ) = R T ,

where a and b are two parameters for a specific gas. Suppose the gas expands isothermally and quasi-statically from volume V 1 to volume V 2 . How much work is done by the gas during the expansion?

Strategy

Because the equation of state is given, we can use [link] to express the pressure in terms of V and T . Furthermore, temperature T is a constant under the isothermal condition, so V becomes the only changing variable under the integral.

Solution

To evaluate this integral, we must express p as a function of V . From the given equation of state, the gas pressure is

p = R T V b a V 2 .

Because T is constant under the isothermal condition, the work done by 1 mol of a van der Waals gas in expanding from a volume V 1 to a volume V 2 is thus

W = V 1 V 2 ( R T V b a V 2 ) = | R T ln ( V b ) + a V | V 1 V 2 = R T ln ( V 2 b V 1 b ) + a ( 1 V 2 1 V 1 ) .

Significance

By taking into account the volume of molecules, the expression for work is much more complex. If, however, we set a = 0 and b = 0 , we see that the expression for work matches exactly the work done by an isothermal process for one mole of an ideal gas.

Got questions? Get instant answers now!

Check Your Understanding How much work is done by the gas, as given in [link] , when it expands quasi-statically along the path ADC ?

p 2 ( V 2 V 1 )

Got questions? Get instant answers now!

Internal energy

The internal energy     E int of a thermodynamic system is, by definition, the sum of the mechanical energies of all the molecules or entities in the system. If the kinetic and potential energies of molecule i are K i and U i , respectively, then the internal energy of the system is the average of the total mechanical energy of all the entities:

Practice Key Terms 2

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, University physics volume 2. OpenStax CNX. Oct 06, 2016 Download for free at http://cnx.org/content/col12074/1.3
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'University physics volume 2' conversation and receive update notifications?

Ask