<< Chapter < Page Chapter >> Page >

Problems

The “lead” in pencils is a graphite composition with a Young’s modulus of approximately 1.0 × 10 9 N / m 2 . Calculate the change in length of the lead in an automatic pencil if you tap it straight into the pencil with a force of 4.0 N. The lead is 0.50 mm in diameter and 60 mm long.

0.3 mm

Got questions? Get instant answers now!

TV broadcast antennas are the tallest artificial structures on Earth. In 1987, a 72.0-kg physicist placed himself and 400 kg of equipment at the top of a 610-m-high antenna to perform gravity experiments. By how much was the antenna compressed, if we consider it to be equivalent to a steel cylinder 0.150 m in radius?

Got questions? Get instant answers now!

By how much does a 65.0-kg mountain climber stretch her 0.800-cm diameter nylon rope when she hangs 35.0 m below a rock outcropping? (For nylon, Y = 1.35 × 10 9 Pa .)

9.0 cm

Got questions? Get instant answers now!

When water freezes, its volume increases by 9.05%. What force per unit area is water capable of exerting on a container when it freezes?

Got questions? Get instant answers now!

A farmer making grape juice fills a glass bottle to the brim and caps it tightly. The juice expands more than the glass when it warms up, in such a way that the volume increases by 0.2%. Calculate the force exerted by the juice per square centimeter if its bulk modulus is 1.8 × 1 0 9 N / m 2 , assuming the bottle does not break.

4.0 × 10 2 N/cm 2

Got questions? Get instant answers now!

A disk between vertebrae in the spine is subjected to a shearing force of 600.0 N. Find its shear deformation, using the shear modulus of 1.0 × 1 0 9 N/m 2 . The disk is equivalent to a solid cylinder 0.700 cm high and 4.00 cm in diameter.

Got questions? Get instant answers now!

A vertebra is subjected to a shearing force of 500.0 N. Find the shear deformation, taking the vertebra to be a cylinder 3.00 cm high and 4.00 cm in diameter. How does your result compare with the result obtained in the preceding problem? Are spinal problems more common in disks than in vertebrae?

0.149 μm

Got questions? Get instant answers now!

Calculate the force a piano tuner applies to stretch a steel piano wire by 8.00 mm, if the wire is originally 1.35 m long and its diameter is 0.850 mm.

Got questions? Get instant answers now!

A 20.0-m-tall hollow aluminum flagpole is equivalent in strength to a solid cylinder 4.00 cm in diameter. A strong wind bends the pole as much as a horizontal 900.0-N force on the top would do. How far to the side does the top of the pole flex?

0.57 mm

Got questions? Get instant answers now!

A copper wire of diameter 1.0 cm stretches 1.0% when it is used to lift a load upward with an acceleration of 2.0 m/s 2 . What is the weight of the load?

Got questions? Get instant answers now!

As an oil well is drilled, each new section of drill pipe supports its own weight and the weight of the pipe and the drill bit beneath it. Calculate the stretch in a new 6.00-m-long steel pipe that supports a 100-kg drill bit and a 3.00-km length of pipe with a linear mass density of 20.0 kg/m. Treat the pipe as a solid cylinder with a 5.00-cm diameter.

8.59 mm

Got questions? Get instant answers now!

A large uniform cylindrical steel rod of density ρ = 7.8 g/cm 3 is 2.0 m long and has a diameter of 5.0 cm. The rod is fastened to a concrete floor with its long axis vertical. What is the normal stress in the rod at the cross-section located at (a) 1.0 m from its lower end? (b) 1.5 m from the lower end?

Got questions? Get instant answers now!

A 90-kg mountain climber hangs from a nylon rope and stretches it by 25.0 cm. If the rope was originally 30.0 m long and its diameter is 1.0 cm, what is Young’s modulus for the nylon?

1.35 × 10 9 Pa

Got questions? Get instant answers now!

A suspender rod of a suspension bridge is 25.0 m long. If the rod is made of steel, what must its diameter be so that it does not stretch more than 1.0 cm when a 2.5 × 10 4 -kg truck passes by it? Assume that the rod supports all of the weight of the truck.

Got questions? Get instant answers now!

A copper wire is 1.0 m long and its diameter is 1.0 mm. If the wire hangs vertically, how much weight must be added to its free end in order to stretch it 3.0 mm?

259.0 N

Got questions? Get instant answers now!

A 100-N weight is attached to a free end of a metallic wire that hangs from the ceiling. When a second 100-N weight is added to the wire, it stretches 3.0 mm. The diameter and the length of the wire are 1.0 mm and 2.0 m, respectively. What is Young’s modulus of the metal used to manufacture the wire?

Got questions? Get instant answers now!

The bulk modulus of a material is 1.0 × 10 11 N/m 2 . What fractional change in volume does a piece of this material undergo when it is subjected to a bulk stress increase of 10 7 N/m 2 ? Assume that the force is applied uniformly over the surface.

0.01%

Got questions? Get instant answers now!

Normal forces of magnitude 1.0 × 10 6 N are applied uniformly to a spherical surface enclosing a volume of a liquid. This causes the radius of the surface to decrease from 50.000 cm to 49.995 cm. What is the bulk modulus of the liquid?

Got questions? Get instant answers now!

During a walk on a rope, a tightrope walker creates a tension of 3.94 × 1 0 3 N in a wire that is stretched between two supporting poles that are 15.0 m apart. The wire has a diameter of 0.50 cm when it is not stretched. When the walker is on the wire in the middle between the poles the wire makes an angle of 5.0 ° below the horizontal. How much does this tension stretch the steel wire when the walker is this position?

1.44 cm

Got questions? Get instant answers now!

When using a pencil eraser, you exert a vertical force of 6.00 N at a distance of 2.00 cm from the hardwood-eraser joint. The pencil is 6.00 mm in diameter and is held at an angle of 20.0 ° to the horizontal. (a) By how much does the wood flex perpendicular to its length? (b) How much is it compressed lengthwise?

Got questions? Get instant answers now!

Normal forces are applied uniformly over the surface of a spherical volume of water whose radius is 20.0 cm. If the pressure on the surface is increased by 200 MPa, by how much does the radius of the sphere decrease?

0.63 cm

Got questions? Get instant answers now!

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, University physics volume 1. OpenStax CNX. Sep 19, 2016 Download for free at http://cnx.org/content/col12031/1.5
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'University physics volume 1' conversation and receive update notifications?

Ask