<< Chapter < Page Chapter >> Page >
By the end of this section, you will be able to:
  • State Pascal’s principle
  • Describe applications of Pascal’s principle
  • Derive relationships between forces in a hydraulic system

In 1653, the French philosopher and scientist Blaise Pascal published his Treatise on the Equilibrium of Liquids , in which he discussed principles of static fluids. A static fluid is a fluid that is not in motion. When a fluid is not flowing, we say that the fluid is in static equilibrium. If the fluid is water, we say it is in hydrostatic equilibrium    . For a fluid in static equilibrium, the net force on any part of the fluid must be zero; otherwise the fluid will start to flow.

Pascal’s observations—since proven experimentally—provide the foundation for hydraulics , one of the most important developments in modern mechanical technology. Pascal observed that a change in pressure applied to an enclosed fluid is transmitted undiminished throughout the fluid and to the walls of its container. Because of this, we often know more about pressure than other physical quantities in fluids. Moreover, Pascal’s principle implies that the total pressure in a fluid is the sum of the pressures from different sources. A good example is the fluid at a depth depends on the depth of the fluid and the pressure of the atmosphere.

Pascal’s principle

Pascal’s principle    (also known as Pascal’s law) states that when a change in pressure is applied to an enclosed fluid, it is transmitted undiminished to all portions of the fluid and to the walls of its container. In an enclosed fluid, since atoms of the fluid are free to move about, they transmit pressure to all parts of the fluid and to the walls of the container. Any change in pressure is transmitted undiminished.

Note that this principle does not say that the pressure is the same at all points of a fluid—which is not true, since the pressure in a fluid near Earth varies with height. Rather, this principle applies to the change in pressure. Suppose you place some water in a cylindrical container of height H and cross-sectional area A that has a movable piston of mass m ( [link] ). Adding weight Mg at the top of the piston increases the pressure at the top by Mg / A , since the additional weight also acts over area A of the lid:

Δ p top = M g A .
Figure A is a schematic drawing of a cylinder filled with fluid and opened to the atmosphere on one side. A disk of mass m and surface area A identical to the surface area of the cylinder is placed in the container. Distance between the disk and the bottom of the cylinder is h. Figure B is a schematic drawing of the cylinder with an additional disk of mass Mg placed atop mass m causing mass m to move lower.
Pressure in a fluid changes when the fluid is compressed. (a) The pressure at the top layer of the fluid is different from pressure at the bottom layer. (b) The increase in pressure by adding weight to the piston is the same everywhere, for example, p top new p top = p bottom new p bottom .

According to Pascal’s principle, the pressure at all points in the water changes by the same amount, Mg / A . Thus, the pressure at the bottom also increases by Mg / A . The pressure at the bottom of the container is equal to the sum of the atmospheric pressure, the pressure due the fluid, and the pressure supplied by the mass. The change in pressure at the bottom of the container due to the mass is

Δ p bottom = M g A .

Since the pressure changes are the same everywhere in the fluid, we no longer need subscripts to designate the pressure change for top or bottom:

Questions & Answers

the number of degree freedom of a rigid body in2-dimantion is:
Raj Reply
1
Nathan
A block (A) of weight 5 kN is to be raised by means of a 20° wedge (B) by the application of a horizontal force (P) as shown in Fig.1. The block A is constrained to move vertically by the application of a horizontal force (S). Find the magnitude of the forces F and S, when the coefficient of fricti
Danilo
A body receives impulses of 24Ns and 35Ns inclined 55 degree to each other. calculate the total impulse
Sukpen Reply
A body receives impulses of 24Ns and 35Ns inclined 55 degree to each other. calculate the total impulse
Previous
twenty four square plus thirty-five square minus to multiple thirty five twenty four and equal answer number square Via this equation defined Total Total impulse
Cemal
why simple pendulum do not vibrate indefinitely?
Zirmal
what is matar
Abdulrahman Reply
The uniform boom shown below weighs 500 N, and the object hanging from its right end weighs 400 N. The boom is supported by a light cable and by a hinge at the wall. Calculate the tension in the cable and the force on the hinge on the boom. Does the force on the hinge act along the boom?
Jave Reply
A 11.0-m boom, AB , of a crane lifting a 3000-kg load is shown below. The center of mass of the boom is at its geometric center, and the mass of the boom is 800 kg. For the position shown, calculate tension T in the cable and the force at the axle A .
Jave
what is the S.I unit of coefficient of viscosity
Biam Reply
Derived the formula of Newton's law of universal gravitation Fg=G(M1M2)/R2
Monychol Reply
hi
Asdesaw
yes
Cemal
a non-uniform boom of a crane 15m long, weighs 2800nts, with its center of gravity at 40% of its lenght from the hingr support. the boom is attached to a hinge at the lower end. rhe boom, which mAKES A 60% ANGLE WITH THE HORIZONTAL IS SUPPORTED BY A HORIZONTAL GUY WIRE AT ITS UPPER END. IF A LOAD OF 5000Nts is hung at the upper end of the boom, find the tension in the guywire and the components of the reaction at the hinge.
dangly Reply
what is the centripetal force
Malok Reply
Of?
John
centripetal force of attraction that pulls a body that is traversing round the orbit of a circle toward the center of the circle. Fc = MV²/r
Sampson
centripetal force is the force of attraction that pulls a body that is traversing round the orbit of a circle toward the center of the circle. Fc = MV²/r
Sampson
I do believe the formula for centripetal force is F=MA or F=m(v^2/r)
John
I mean the formula is Fc= Mass multiplied by square of velocity all over the Radius of the circle
Sampson
Yes
John
The force is equal to the mass times the velocity squared divided by the radius
John
That's the current chapter I'm on in my engineering physics class
John
Centripetal force is a force of attraction which keeps an object round the orbit towards the center of a circle. Mathematically Fc=mv²/r
Adebileje
In Example, we calculated the final speed of a roller coaster that descended 20 m in height and had an initial speed of 5 m/s downhill. Suppose the roller coaster had had an initial speed of 5 m/s uphill instead, and it coasted uphill, stopped, and then rolled back down to a final point 20 m bel
tan Reply
A steel lift column in a service station is 4 meter long and .2 meter in diameter. Young's modulus for steel is 20 X 1010N/m2.  By how much does the column shrink when a 5000- kg truck is on it?
Andiswa Reply
hi
Abdulrahman
mola mass
Abdulrahman
hi
Asdesaw
what exactly is a transverse wave
Dharmee Reply
does newton's first law mean that we don't need gravity to be attracted
Dharmee Reply
no, it just means that a brick isn't gonna move unless something makes it move. if in the air, moves down because of gravity. if on floor, doesn't move unless something has it move, like a hand pushing the brick. first law is that an object will stay at rest or motion unless another force acts upon
Grant
yeah but once gravity has already been exerted .. i am saying that it need not be constantly exerted now according to newtons first law
Dharmee
gravity is constantly being exerted. gravity is the force of attractiveness between two objects. you and another person exert a force on each other but the reason you two don't come together is because earth's effect on both of you is much greater
Grant
maybe the reason we dont come together is our inertia only and not gravity
Dharmee
this is the definition of inertia: a property of matter by which it continues in its existing state of rest or uniform motion in a straight line, unless that state is changed by an external force.
Grant
the earth has a much higher affect on us force wise that me and you together on each other, that's why we don't attract, relatively speaking of course
Grant
quite clear explanation but i just want my mind to be open to any theory at all .. its possible that maybe gravity does not exist at all or even the opposite can be true .. i dont want a fixed state of mind thats all
Dharmee
why wouldn't gravity exist? gravity is just the attractive force between two objects, at least to my understanding.
Grant
earth moves in a circular motion so yes it does need a constant force for a circular motion but incase of objects on earth i feel maybe there is no force of attraction towards the centre and its our inertia forcing us to stay at a point as once gravity had acted on the object
Dharmee
why should it exist .. i mean its all an assumption and the evidences are empirical
Dharmee
We have equations to prove it and lies of evidence to support. we orbit because we have a velocity and the sun is pulling us. Gravity is a law, we know it exists.
Grant
yeah sure there are equations but they are based on observations and assumptions
Dharmee
g is obtained by a simple pendulum experiment ...
Dharmee
gravity is tested by dropping a rock...
Grant
and also there were so many newtonian laws proved wrong by einstein . jus saying that its a law doesnt mean it cant be wrong
Dharmee
pendulum is good for showing energy transfer, here is an article on the detection of gravitational waves: ***ligo.org/detections.php
Grant
yeah but g is calculated by pendulum oscillations ..
Dharmee
thats what .. einstein s fabric model explains that force of attraction by sun on earth but i am talking about force of attraction by earth on objects on earth
Dharmee
no... this is how gravity is calculated:F = G*((m sub 1*m sub 2)/r^2)
Grant
gravitational constant is obtained EXPERIMENTALLY
Dharmee
the G part
Dharmee
Calculate the time of one oscillation or the period (T) by dividing the total time by the number of oscillations you counted. Use your calculated (T) along with the exact length of the pendulum (L) in the above formula to find "g." This is your measured value for "g."
Dharmee
G is the universal gravitational constant. F is the gravity
Grant
search up the gravity equation
Grant
yeahh G is obtained experimentally
Dharmee
sure yes
Grant
thats what .. after all its EXPERIMENTALLY calculated so its empirical
Dharmee
yes... so where do we disagree?
Grant
its empirical whixh means it can be proved wrong
Dharmee
so cant just say why wouldnt gravity exists
Dharmee
the constant, sure but extremely unlikely it is wrong. gravity however exists, there are equations and loads of support surrounding the concept. unfortunately I don't have a high enough background in physics but have this discussion with a physicist
Grant
can u suggest a platform where i can?
Dharmee
stack overflow
Grant
stack exchange, physics section***
Grant
its an app?
Dharmee
there is! it is also a website as well
Grant
okayy
Dharmee
nice talking to you
Dharmee
***physics.stackexchange.com/
Grant
likewise :)
Grant
Gravity surely exist
muhammed
hi guys
Diwash
hi
muhammed
what is mathematics
Fadumo
What is the percentage by massof oxygen in Al2(so4)3
Isiguzo Reply
molecular mass of Al2(SO4)3 = (27×2)+3{(32×1)+(16×4)} =54+3(32+64) =54+3×96 =54+288 =342 g/mol molecular mass of Oxygen=12×16 =192 g/mol % of Oxygen= (molecular mass of Oxygen/ molecular mass of the compound)×100% =(192/342)×100% =19200/342% =56.14%
Adebileje
A spring with 50g mass suspended from it,has its length extended by 7.8cm 1.1 determine the spring constant? 1.2 it is observed that the length of the spring decreases by 4.7cm,from its original length, when a toy is place on top of it. what is the mass of the toy?
Silindelo Reply
solution mass = 50g= 0.05kg force= 50 x 10= 500N extension= 7.8cm = 0.078m using the formula Force= Ke K = force/extension 500/.078 = 6410.25N/m
Sampson
1.2 Decrease in length= -4.7cm =-0.047m mass=? acceleration due to gravity= 10 force = K x e force= mass x acceleration m x a = K x e mass = K x e/acceleration = 6410.25 x 0.047/10 = 30.13kg
Sampson
1.1 6.28Nm-¹
Anita
1.2 0.03kg or 30g
Anita
I used g=9.8ms-²
Anita
you should explain how yoy got the answer Anita
Grant
ok
Anita
with the fomular F=mg I got the value for force because now the force acting on the spring is the weight of the object and also you have to convert from grams to kilograms and cm to meter
Anita
so the spring constant K=F/e where F is force and e is extension
Anita
mass=50g=50/1000 kg m=0.05kg extension=7.8 cm=7.8/100 e=0.078 m g=9.8 m/s² 1.1 F=ke k=F/e k=mg/e k=0.05×9.8/0.078 k=0.49/0.078 k=6.28 N/m 1.2 F=6.28e mg=6.28e m=6.28e/g e=4.7 cm =4.7/100 e=0.047 m=6.28×0.047/9.8 m=0.29516/9.8 m=0.0301 kg
Adebileje
In this first example why didn't we use P=P° + ¶hg where ¶ is density
Anita Reply
Density = force applied x area p=fA =p = mga, then a=h therefore substitute =p =mgh
Hlehle
Please correct me
Hlehle
sorry I had a little typo in my question
Anita
Density = m/v (mass/volume) simple as that
Augustine
Hlehle vilakazi how density is equal to force * area and you also wrote p= mgh which is machenical potential energy ? how ?
Manorama
Practice Key Terms 3

Get the best University physics vol... course in your pocket!





Source:  OpenStax, University physics volume 1. OpenStax CNX. Sep 19, 2016 Download for free at http://cnx.org/content/col12031/1.5
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'University physics volume 1' conversation and receive update notifications?

Ask