# 2.1 Displacement

 Page 2 / 7

Note that displacement has a direction as well as a magnitude. The professor’s displacement is 2.0 m to the right, and the airline passenger’s displacement is 4.0 m toward the rear. In one-dimensional motion, direction can be specified with a plus or minus sign. When you begin a problem, you should select which direction is positive (usually that will be to the right or up, but you are free to select positive as being any direction). The professor’s initial position is ${x}_{0}=1\text{.}5\phantom{\rule{0.25em}{0ex}}\text{m}$ and her final position is ${x}_{\text{f}}=3\text{.}5\phantom{\rule{0.25em}{0ex}}\text{m}$ . Thus her displacement is

$\Delta x={x}_{f}-{x}_{0}=3\text{.5 m}-1.5 m=+2\text{.0 m}.$

In this coordinate system, motion to the right is positive, whereas motion to the left is negative. Similarly, the airplane passenger’s initial position is ${x}_{0}=6\text{.}0 m$ and his final position is ${x}_{f}=2\text{.}0 m$ , so his displacement is

$\Delta x={x}_{f}-{x}_{0}=2\text{.}0 m-6\text{.}0 m=-4\text{.}0 m.$

His displacement is negative because his motion is toward the rear of the plane, or in the negative $x$ direction in our coordinate system.

## Distance

Although displacement is described in terms of direction, distance is not. Distance is defined to be the magnitude or size of displacement between two positions . Note that the distance between two positions is not the same as the distance traveled between them. Distance traveled is the total length of the path traveled between two positions . Distance has no direction and, thus, no sign. For example, the distance the professor walks is 2.0 m. The distance the airplane passenger walks is 4.0 m.

## Misconception alert: distance traveled vs. magnitude of displacement

It is important to note that the distance traveled , however, can be greater than the magnitude of the displacement (by magnitude, we mean just the size of the displacement without regard to its direction; that is, just a number with a unit). For example, the professor could pace back and forth many times, perhaps walking a distance of 150 m during a lecture, yet still end up only 2.0 m to the right of her starting point. In this case her displacement would be +2.0 m, the magnitude of her displacement would be 2.0 m, but the distance she traveled would be 150 m. In kinematics we nearly always deal with displacement and magnitude of displacement, and almost never with distance traveled. One way to think about this is to assume you marked the start of the motion and the end of the motion. The displacement is simply the difference in the position of the two marks and is independent of the path taken in traveling between the two marks. The distance traveled, however, is the total length of the path taken between the two marks.

A cyclist rides 3 km west and then turns around and rides 2 km east. (a) What is her displacement? (b) What distance does she ride? (c) What is the magnitude of her displacement?

(a) The rider’s displacement is $\Delta x={x}_{f}-{x}_{0}=\text{−1 km}$ . (The displacement is negative because we take east to be positive and west to be negative.)

(b) The distance traveled is $\text{3 km}+\text{2 km}=\text{5 km}$ .

(c) The magnitude of the displacement is $1 km$ .

## Section summary

• Kinematics is the study of motion without considering its causes. In this chapter, it is limited to motion along a straight line, called one-dimensional motion.
• Displacement is the change in position of an object.
• In symbols, displacement $\Delta x$ is defined to be
$\Delta x={x}_{f}-{x}_{0},$
where ${x}_{0}$ is the initial position and ${x}_{f}$ is the final position. In this text, the Greek letter $\Delta$ (delta) always means “change in” whatever quantity follows it. The SI unit for displacement is the meter (m). Displacement has a direction as well as a magnitude.
• When you start a problem, assign which direction will be positive.
• Distance is the magnitude of displacement between two positions.
• Distance traveled is the total length of the path traveled between two positions.

## Conceptual questions

Give an example in which there are clear distinctions among distance traveled, displacement, and magnitude of displacement. Specifically identify each quantity in your example.

Under what circumstances does distance traveled equal magnitude of displacement? What is the only case in which magnitude of displacement and displacement are exactly the same?

Bacteria move back and forth by using their flagella (structures that look like little tails). Speeds of up to $\text{50 μm/s}\phantom{\rule{0.25em}{0ex}}\left(\text{50}×{\text{10}}^{-6}\phantom{\rule{0.25em}{0ex}}\text{m/s}\right)$ have been observed. The total distance traveled by a bacterium is large for its size, while its displacement is small. Why is this?

## Problems&Exercises

Find the following for path A in [link] : (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.

(a) 7 m

(b) 7 m

(c) $+7 m$

Find the following for path B in [link] : (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.

Find the following for path C in [link] : (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.

(a) 13 m

(b) 9 m

(c) $+9 m$

Find the following for path D in [link] : (a) The distance traveled. (b) The magnitude of the displacement from start to finish. (c) The displacement from start to finish.

the range of objects and phenomena studied in physics is
what is Linear motion
straight line motion is called linear motion
then what
Amera
linear motion is a motion in a line, be it in a straight line or in a non straight line. It is the rate of change of distance.
Saeedul
Hi
aliyu
Richard
Linear motion is a one-dimensional motion along a straight line, and can therefore be described mathematically using only one spatial dimension
Jason
what is the formula to calculate wavelength of the incident light
if a spring is is stiffness of 950nm-1 what work will be done in extending the spring by 60mmp
State the forms of energy
machanical
Ridwan
Word : Mechanical wave Definition : The waves, which need a material medium for their propagation, e.g., Sound waves. \n\nOther Definition: The waves, which need a material medium for their propagation, are called mechanical waves. Mechanical waves are also called elastic waves. Sound waves, water waves are examples of mechanical waves.t Definition: wave consisting of periodic motion of matter; e.g. sound wave or water wave as opposed to electromagnetic wave.h
correct
Akinpelu
what is mechanical wave
a wave which require material medium for its propagation
syed
The S.I unit for power is what?
watt
Okoli
Am I correct
Okoli
it can be in kilowatt, megawatt and so
Femi
yes
Femi
correct
Jaheim
kW
Akinpelu
OK that's right
Samuel
SI.unit of power is.watt=j/c.but kw.and Mw are bigger.umots
syed
What is physics
study of matter and its nature
Akinpelu
The word physics comes from a Greek word Physicos which means Nature.The Knowledge of Nature. It is branch of science which deals with the matter and energy and interaction between them.
Uniform
why in circular motion, a tangential acceleration can change the magnitude of the velocity but not its direction
reasonable
Femi
because it is balanced by the inward acceleration otherwise known as centripetal acceleration
MUSTAPHA
What is a wave
Tramsmission of energy through a media
Mateo
is the disturbance that carry materials as propagation from one medium to another
Akinpelu
mistakes thanks
Akinpelu
find the triple product of (A*B).C given that A =i + 4j, B=2i - 3j and C = i + k
Difference between north seeking pole and south seeking pole
if the earth Suddenly contract s then
please formula for density is what
Akinpelu
mass/volume
Jaja
what is motion
In physics, motion is the change in position of an object with respect to its surroundings in a given interval of time. Motion is mathematically described in terms of displacement, distance, velocity, acceleration, time, and speed. ... Momentum is a quantity which is used for measuring the motion of
Karthi