# Rolling motion

 Page 1 / 4
Rolling motion is a composite motion, in which the body rotates about a moving axis as it translates from one position to another.

Rolling motion is a composite motion, in which a body undergoes both translational and rotational motion. The wheel of a car, for example, rotates about a moving axis and at the same time translates a net distance. Rolling motion being superposition of two types of motion, presents a different context of motion, which needs visualization from different perspectives. Importantly, different parts of the wheel are moving with different velocities, depending on their relative positions with respect to the center of mass or the point of contact with the surface.

In this module, we shall examine rolling motion of a circular disc along a straight line. This study shall be valid for all other circular or spherical bodies capable of rolling such as sphere, cylinder, ring etc.

## Characterizing features of rolling motion

In order to bring out characterizing aspects of rolling motion, we consider a disk, which is rolling without sliding (simply referred as rolling) smoothly on a horizontal surface such that its center of mass translates with a velocity " ${v}_{C}$ " in x-direction.

## Rolling without sliding

“Rolling without sliding” means that the point on the rim in contact with the surface changes continuously as the disk rotates while translating ahead. If point "A" is in contact at a given time "t", then another neighboring point "B" takes up the position immediately after, say, at a time instant, t+dt. In case the disk slides while translating, the point of contact remains same at the two time instants. The two cases are illustrated in the figure here. Comparison between "rolling without sliding" and "siliding without rolling".

The terms “Rolling without sliding”, "pure rolling" or simply "rolling" refer to same composite motion along a straight line.

## Description of rolling in moving frame

When rolling motion is seen from a frame of reference attached to the center of rolling disk i.e. a frame of reference which is moving with a velocity, " ${v}_{C}$ ", the particles constituting the disk undergo rotation with an angular velocity,ω, without translation. The axis of rotation is fixed in the moving frame of reference. As such, rolling is a pure rotation in the moving frame of reference attached to the center of disk.

In this frame of reference (attached to the rolling disk), a particle on the rim of the disk rotates through the same distance in a given time as distance covered by the moving frame of reference in x-direction. If the particle in contact with the surface describes an angle 2π in rolling motion, then both the particle and axis of rotation (also center of mass) travels a distance 2πr. However, they describe different paths. The particle on the rim travels an arc as seen from the moving reference, whereas the center of mass or attached frame of reference travels along a straight line as seen from the ground.

In general, if the moving frame of reference travels a distance "x" in time "t", then the particle at the contact point also rotates through the same distance along the arc of the perimeter of rolling object. This is true for a particle on any position on the rim of the disk. The figure here captures the two situations corresponding to start and end of the observations. From the geometry shown in the figure,

#### Questions & Answers

A stone propelled from a catapult with a speed of 50ms-1 attains a height of 100m. Calculate the time of flight, calculate the angle of projection, calculate the range attained
58asagravitasnal firce
Amar
water boil at 100 and why
what is upper limit of speed
what temperature is 0 k
Riya
0k is the lower limit of the themordynamic scale which is equalt to -273 In celcius scale
Mustapha
How MKS system is the subset of SI system?
which colour has the shortest wavelength in the white light spectrum
how do we add
if x=a-b, a=5.8cm b=3.22 cm find percentage error in x
x=5.8-3.22 x=2.58
what is the definition of resolution of forces
what is energy?
Ability of doing work is called energy energy neither be create nor destryoed but change in one form to an other form
Abdul
motion
Mustapha
highlights of atomic physics
Benjamin
can anyone tell who founded equations of motion !?
n=a+b/T² find the linear express
أوك
عباس
Quiklyyy
Moment of inertia of a bar in terms of perpendicular axis theorem
How should i know when to add/subtract the velocities and when to use the Pythagoras theorem?
Centre of mass of two uniform rods of same length but made of different materials and kept at L-shape meeting point is origin of coordinate By David Martin By By     By By 