1. Home
  2. College physics for ap® courses
  3. Electromagnetic induction, ac
  4. Rlc series ac circuits

23.12 Rlc series ac circuits  (Page 5/9)

<< Chapter < Page
  College physics for ap® courses     Page 5 / 9
Chapter >> Page >

A pure LC circuit with negligible resistance oscillates at f 0 size 12{f rSub { size 8{0} } } {} , the same resonant frequency as an RLC circuit. It can serve as a frequency standard or clock circuit—for example, in a digital wristwatch. With a very small resistance, only a very small energy input is necessary to maintain the oscillations. The circuit is analogous to a car with no shock absorbers. Once it starts oscillating, it continues at its natural frequency for some time. [link] shows the analogy between an LC circuit and a mass on a spring.

The figure describes four stages of an L C oscillation circuit compared to a mass oscillating on a spring. Part a of the figure shows a mass attached to a horizontal spring. The spring is attached to a fixed support on the left. The mass is at rest as shown by velocity v equals zero. The energy of the spring is shown as potential energy. This is compared with a circuit containing a capacitor C and inductor L connected together. The energy is shown as stored in the electric field E of the capacitor between the plates. One plate is shown to have a negative polarity and other plate is shown to have a positive polarity. Part b of the figure shows a mass attached to a horizontal spring which is attached to a fixed support on the left. The mass is shown to move horizontal toward the fixed support with velocity v. The energy here is stored as the kinetic energy of the spring. This is compared with a circuit containing a capacitor C and inductor L connected together. A current is shown in the circuit and energy is stored as magnetic field B in the inductor. Part c of the figure shows a mass attached to a horizontal spring which is attached to a fixed support on the left. The spring is shown as not stretched and the energy is shown as potential energy of the spring. The mass is show to have displaced toward left. This is compared with a circuit containing a capacitor C and inductor L connected together. The energy is shown as stored in the electric field E of the capacitor between the plates. One plate is shown to have a negative polarity and other plate is shown to have a positive polarity. But the polarities are reverse of the first case in part a. Part d of the figure shows a mass attached to a horizontal spring which is attached to a fixed support on the left. The mass is shown to move toward right with velocity v. the energy of the spring is kinetic energy. This is compared with a circuit containing a capacitor C and inductor L connected together. A current is shown in the circuit opposite to that in part b and energy is stored as magnetic field B in the inductor.
An LC circuit is analogous to a mass oscillating on a spring with no friction and no driving force. Energy moves back and forth between the inductor and capacitor, just as it moves from kinetic to potential in the mass-spring system.

Phet explorations: circuit construction kit (ac+dc), virtual lab

Build circuits with capacitors, inductors, resistors and AC or DC voltage sources, and inspect them using lab instruments such as voltmeters and ammeters.

Circuit Construction Kit (AC+DC), Virtual Lab

Section summary

  • The AC analogy to resistance is impedance Z , the combined effect of resistors, inductors, and capacitors, defined by the AC version of Ohm’s law:
    I 0 = V 0 Z or I rms = V rms Z , size 12{I rSub { size 8{0} } = { {V rSub { size 8{0} } } over {Z} } " or "I rSub { size 8{ ital "rms"} } = { {V rSub { size 8{ ital "rms"} } } over {Z} } ,} {}
    where I 0 size 12{I rSub { size 8{0} } } {} is the peak current and V 0 size 12{V rSub { size 8{0} } } {} is the peak source voltage.
  • Impedance has units of ohms and is given by Z = R 2 + ( X L − X C ) 2 size 12{Z= sqrt {R rSup { size 8{2} } + \( X rSub { size 8{L} } - X rSub { size 8{C} } \) rSup { size 8{2} } } } {} .
  • The resonant frequency f 0 size 12{f rSub { size 8{0} } } {} , at which X L = X C size 12{X rSub { size 8{L} } =X rSub { size 8{C} } } {} , is
    f 0 = 1 2π LC . size 12{f rSub { size 8{0} } = { {1} over {2π sqrt { ital "LC"} } } } {}
  • In an AC circuit, there is a phase angle ϕ size 12{ϕ} {} between source voltage V size 12{V} {} and the current I size 12{I} {} , which can be found from
    cos ϕ = R Z , size 12{"cos"ϕ= { {R} over {Z} } } {}
  • ϕ = 0º size 12{ϕ=0 rSup { size 8{ circ } } } {} for a purely resistive circuit or an RLC circuit at resonance.
  • The average power delivered to an RLC circuit is affected by the phase angle and is given by
    P ave = I rms V rms cos ϕ , size 12{P rSub { size 8{"ave"} } =I rSub { size 8{"rms"} } V rSub { size 8{"rms"} } "cos"ϕ} {}
    cos ϕ size 12{"cos"ϕ} {} is called the power factor, which ranges from 0 to 1.

Conceptual questions

Does the resonant frequency of an AC circuit depend on the peak voltage of the AC source? Explain why or why not.

Got questions? Get instant answers now!

Suppose you have a motor with a power factor significantly less than 1. Explain why it would be better to improve the power factor as a method of improving the motor’s output, rather than to increase the voltage input.

Got questions? Get instant answers now!

Problems&Exercises

An RL circuit consists of a 40.0 Ω resistor and a 3.00 mH inductor. (a) Find its impedance Z at 60.0 Hz and 10.0 kHz. (b) Compare these values of Z with those found in [link] in which there was also a capacitor.

(a) 40.02 Ω at 60.0 Hz, 193 Ω at 10.0 kHz

(b) At 60 Hz, with a capacitor, Z=531 Ω , over 13 times as high as without the capacitor. The capacitor makes a large difference at low frequencies. At 10 kHz, with a capacitor Z=190 Ω , about the same as without the capacitor. The capacitor has a smaller effect at high frequencies.

Got questions? Get instant answers now!

An RC circuit consists of a 40.0 Ω resistor and a 5.00 μF capacitor. (a) Find its impedance at 60.0 Hz and 10.0 kHz. (b) Compare these values of Z with those found in [link] , in which there was also an inductor.

Got questions? Get instant answers now!

An LC circuit consists of a 3 . 00 mH size 12{3 "." "00" μH} {} inductor and a 5 . 00 μF size 12{5 "." "00" μF} {} capacitor. (a) Find its impedance at 60.0 Hz and 10.0 kHz. (b) Compare these values of Z size 12{Z} {} with those found in [link] in which there was also a resistor.

(a) 529 Ω at 60.0 Hz, 185 Ω at 10.0 kHz

(b) These values are close to those obtained in [link] because at low frequency the capacitor dominates and at high frequency the inductor dominates. So in both cases the resistor makes little contribution to the total impedance.

Got questions? Get instant answers now!

What is the resonant frequency of a 0.500 mH inductor connected to a 40.0 μF capacitor?

Got questions? Get instant answers now!

To receive AM radio, you want an RLC circuit that can be made to resonate at any frequency between 500 and 1650 kHz. This is accomplished with a fixed 1.00 μH inductor connected to a variable capacitor. What range of capacitance is needed?

9.30 nF to 101 nF

Got questions? Get instant answers now!

Suppose you have a supply of inductors ranging from 1.00 nH to 10.0 H, and capacitors ranging from 1.00 pF to 0.100 F. What is the range of resonant frequencies that can be achieved from combinations of a single inductor and a single capacitor?

Got questions? Get instant answers now!

What capacitance do you need to produce a resonant frequency of 1.00 GHz, when using an 8.00 nH inductor?

3.17 pF

Got questions? Get instant answers now!

What inductance do you need to produce a resonant frequency of 60.0 Hz, when using a 2.00 μF capacitor?

Got questions? Get instant answers now!

The lowest frequency in the FM radio band is 88.0 MHz. (a) What inductance is needed to produce this resonant frequency if it is connected to a 2.50 pF capacitor? (b) The capacitor is variable, to allow the resonant frequency to be adjusted to as high as 108 MHz. What must the capacitance be at this frequency?

(a) 1.31 μH

(b) 1.66 pF

Got questions? Get instant answers now!

An RLC series circuit has a 2.50 Ω resistor, a 100 μH inductor, and an 80.0 μF capacitor.(a) Find the circuit’s impedance at 120 Hz. (b) Find the circuit’s impedance at 5.00 kHz. (c) If the voltage source has V rms = 5 . 60 V size 12{V rSub { size 8{"rms"} } =5 "." "60"`V} {} , what is I rms size 12{I rSub { size 8{"rms"} } } {} at each frequency? (d) What is the resonant frequency of the circuit? (e) What is I rms size 12{I rSub { size 8{"rms"} } } {} at resonance?

Got questions? Get instant answers now!

An RLC series circuit has a 1.00 kΩ resistor, a 150 μH inductor, and a 25.0 nF capacitor. (a) Find the circuit’s impedance at 500 Hz. (b) Find the circuit’s impedance at 7.50 kHz. (c) If the voltage source has V rms = 408 V size 12{V rSub { size 8{"rms"} } ="408"`V} {} , what is I rms size 12{I rSub { size 8{"rms"} } } {} at each frequency? (d) What is the resonant frequency of the circuit? (e) What is I rms size 12{I rSub { size 8{"rms"} } } {} at resonance?

(a) 12.8 kΩ

(b) 1.31 kΩ

(c) 31.9 mA at 500 Hz, 312 mA at 7.50 kHz

(d) 82.2 kHz

(e) 0.408 A

Got questions? Get instant answers now!

An RLC series circuit has a 2.50 Ω resistor, a 100 μH inductor, and an 80.0 μF capacitor. (a) Find the power factor at f = 120 Hz . (b) What is the phase angle at 120 Hz? (c) What is the average power at 120 Hz? (d) Find the average power at the circuit’s resonant frequency.

Got questions? Get instant answers now!

An RLC series circuit has a 1.00 kΩ resistor, a 150 μH inductor, and a 25.0 nF capacitor. (a) Find the power factor at f = 7.50 Hz . (b) What is the phase angle at this frequency? (c) What is the average power at this frequency? (d) Find the average power at the circuit’s resonant frequency.

(a) 0.159

(b) 80.9º

(c) 26.4 W

(d) 166 W

Got questions? Get instant answers now!

An RLC series circuit has a 200 Ω resistor and a 25.0 mH inductor. At 8000 Hz, the phase angle is 45.0º . (a) What is the impedance? (b) Find the circuit’s capacitance. (c) If V rms = 408 V size 12{V rSub { size 8{"rms"} } ="408"`V} {} is applied, what is the average power supplied?

Got questions? Get instant answers now!

Referring to [link] , find the average power at 10.0 kHz.

16.0 W

Got questions? Get instant answers now!

Questions & Answers

it is the relatively stable flow of income
Chidubem Reply
what is circular flow of income
Divine Reply
branches of macroeconomics
SHEDRACK Reply
what is Flexible exchang rate?
poudel Reply
is gdp a reliable measurement of wealth
Atega Reply
introduction to econometrics
Husseini Reply
Hi
mostafa
hi
LEMLEM
hello
Sammol
hi
Mahesh
bi
Ruqayat
hi
Ruqayat
Hi fellas
Nyawa
hey
Sammol
hi
God
hello
Jahara
Good morning
Jorge
hi
abubakar
hi
Nmesoma
hi
Mahesh
Hi
Tom
Why is unemployment rate never zero at full employment?
Priyanka Reply
bcoz of existence of frictional unemployment in our economy.
Umashankar
what is flexible exchang rate?
poudel
due to existence of the pple with disabilities
Abdulraufu
the demand of a good rises, causing the demand for another good to fall
Rushawn Reply
is it possible to leave every good at the same level
Joseph
I don't think so. because check it, if the demand for chicken increases, people will no longer consume fish like they used to causing a fall in the demand for fish
Anuolu
is not really possible to let the value of a goods to be same at the same time.....
Salome
Suppose the inflation rate is 6%, does it mean that all the goods you purchase will cost 6% more than previous year? Provide with reasoning.
Geetha Reply
Not necessarily. To measure the inflation rate economists normally use an averaged price index of a basket of certain goods. So if you purchase goods included in the basket, you will notice that you pay 6% more, otherwise not necessarily.
Waeth
discus major problems of macroeconomics
Alii Reply
what is the problem of macroeconomics
Yoal
Economic growth Stable prices and low unemployment
Ephraim
explain inflationcause and itis degre
Miresa Reply
what is inflation
Getu
increase in general price levels
WEETO
Good day How do I calculate this question: C= 100+5yd G= 2000 T= 2000 I(planned)=200. Suppose the actual output is 3000. What is the level of planned expenditures at this level of output?
Chisomo Reply
how to calculate actual output?
Chisomo
how to calculate the equilibrium income
Beshir
Criteria for determining money supply
Thapase Reply
who we can define macroeconomics in one line
Muhammad
Aggregate demand
Mohammed
C=k100 +9y and i=k50.calculate the equilibrium level of output
Mercy Reply
Hi
Isiaka
Hi
Geli
hy
Man
👋
Bahunda
hy how are you?
Man
ys
Amisha
how are you guys
Sekou
f9 guys
Amisha
how are you guys
Sekou
ys am also fine
Amisha
fine and you guys
Geli
from Nepal
Amisha
nawalparasi district from belatari
Amisha
nd u
Amisha
I am Camara from Guinea west Africa... happy to meet you guys here
Sekou
ma management ho
Amisha
ahile becheclor ho
Amisha
hjr ktm bta ho ani k kaam grnu hunxa tw
Amisha
belatari
Amisha
1st year ho
Amisha
nd u
Amisha
ahh
Amisha
kaha biratnagar
Amisha
ys
Amisha
kina k vo
Amisha
money as unit of account means what?
Kalombe
A unit of account is something that can be used to value goods and services and make calculations
Jim
all of you please speak in English I can't understand you're language
Muhammad
I want to know how can we define macroeconomics in one line
Muhammad
it must be .9 or 0.9 no Mpc is greater than 1 Y=100+.9Y+50 Y-.9Y=150 0.1Y/0.1=150/0.1 Y=1500
Kalombe
Mercy is it clear?😋
Kalombe
hi can someone help me on this question If a negative shocks shifts the IS curve to the left, what type of policy do you suggest so as to stabilize the level of output? discuss your answer using appropriate graph.
Galge Reply
if interest rate is increased this will will reduce the level of income shifting the curve to the left ◀️
Kalombe
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply
<< Chapter < Page Page > Chapter >>
Practice Key Terms 4

Read also:

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, College physics for ap® courses. OpenStax CNX. Nov 04, 2016 Download for free at https://legacy.cnx.org/content/col11844/1.14
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'College physics for ap® courses' conversation and receive update notifications?

Ask