<< Chapter < Page Chapter >> Page >

Learning objectives

By the end of this section, you will be able to:

  • Explain the origin of Ohm's law.
  • Calculate voltages, currents, and resistances with Ohm's law.
  • Explain the difference between ohmic and non-ohmic materials.
  • Describe a simple circuit.

The information presented in this section supports the following AP® learning objectives and science practices:

  • 4.E.4.1 The student is able to make predictions about the properties of resistors and/or capacitors when placed in a simple circuit based on the geometry of the circuit element and supported by scientific theories and mathematical relationships. (S.P. 2.2, 6.4)

What drives current? We can think of various devices—such as batteries, generators, wall outlets, and so on—which are necessary to maintain a current. All such devices create a potential difference and are loosely referred to as voltage sources. When a voltage source is connected to a conductor, it applies a potential difference V size 12{V} {} that creates an electric field. The electric field in turn exerts force on charges, causing current.

Ohm's law

The current that flows through most substances is directly proportional to the voltage V size 12{V} {} applied to it. The German physicist Georg Simon Ohm (1787–1854) was the first to demonstrate experimentally that the current in a metal wire is directly proportional to the voltage applied :

I V . size 12{I prop V.} {}

This important relationship is known as Ohm's law    . It can be viewed as a cause-and-effect relationship, with voltage the cause and current the effect. This is an empirical law like that for friction—an experimentally observed phenomenon. Such a linear relationship doesn't always occur.

Resistance and simple circuits

If voltage drives current, what impedes it? The electric property that impedes current (crudely similar to friction and air resistance) is called resistance     R size 12{R} {} . Collisions of moving charges with atoms and molecules in a substance transfer energy to the substance and limit current. Resistance is defined as inversely proportional to current, or

I 1 R . size 12{I prop { {1} over {R} } "."} {}

Thus, for example, current is cut in half if resistance doubles. Combining the relationships of current to voltage and current to resistance gives

I = V R . size 12{I = { {V} over {R} } "."} {}

This relationship is also called Ohm's law. Ohm's law in this form really defines resistance for certain materials. Ohm's law (like Hooke's law) is not universally valid. The many substances for which Ohm's law holds are called ohmic    . These include good conductors like copper and aluminum, and some poor conductors under certain circumstances. Ohmic materials have a resistance R size 12{R} {} that is independent of voltage V size 12{V} {} and current I size 12{I} {} . An object that has simple resistance is called a resistor , even if its resistance is small. The unit for resistance is an ohm    and is given the symbol Ω size 12{ %OMEGA } {} (upper case Greek omega). Rearranging I = V/R size 12{I = ital "V/R"} {} gives R = V/I size 12{R= ital "V/I"} {} , and so the units of resistance are 1 ohm = 1 volt per ampere:

1 Ω = 1 V A . size 12{"1 " %OMEGA =" 1 " { {V} over {A} } "."} {}

[link] shows the schematic for a simple circuit. A simple circuit    has a single voltage source and a single resistor. The wires connecting the voltage source to the resistor can be assumed to have negligible resistance, or their resistance can be included in R size 12{R} {} .

Practice Key Terms 5

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, College physics for ap® courses. OpenStax CNX. Nov 04, 2016 Download for free at https://legacy.cnx.org/content/col11844/1.14
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'College physics for ap® courses' conversation and receive update notifications?

Ask