<< Chapter < Page Chapter >> Page >
This module is part of the collection, A First Course in Electrical and Computer Engineering . The LaTeX source files for this collection were created using an optical character recognition technology, and because of this process there may be more errors than usual. Please contact us if you discover any errors.

Notes to teachers and students:

Phasors! For those who understand them, they are of incomparable value for the study of elementary and advanced topics. For those who misunderstand them, they are a constant source of confusion and are of no apparent use. So, let's understand them.

The conceptual leap from the complex number e j θ to the phasor e j ( ω t + θ ) comes in "Phasor Representation of Signals" . Take as long as necessary to understand every geometrical and algebraic nuance. Write the MATLAB program in "Exercise 6" to fix the key ideas once and for all. Then use phasors to study beating between tones, multiphase power, and Lissajous figures in "Beating between Tones" through "Lissajous Figures" . We usually conduct a classroom demonstration of beating between tones usingtwo phase-locked sources, an oscilloscope, and a speaker. We also demonstrate Lissajous figures with this hardware.

"Sinusoidal Steady State and the Series RLC Circuit" and Light Scattering by a Slit" on sinusoidal steady state and light scattering are too demanding for freshmen but are right on target for sophomores. Thesesections may be covered in a sophomore course (or a supplement to a sophomore course) or skipped in a freshman course without consequence.

In the numerical experiment in "Numerical Experiment (Interference Patterns)" , students compute and plot interference patterns for two sinusoids that are out of phase.

Introduction

In engineering and applied science, three test signals form the basis for our study of electrical and mechanical systems. The impulse is an idealized signal that models very short excitations (like current pulses, hammer blows, pile drives, and light flashes). The step is an idealized signal that models excitations that are switched on and stay on (like current in a relay that closes or a transistor that switches). The sinusoid is an idealized signal that models excitations that oscillate with a regular frequency (like AC power, AM radio, pure musical tones, and harmonic vibrations). All three signals are used in the laboratory to design and analyze electrical and mechanical circuits, control systems, radio antennas, and the like. The sinusoidal signal is particularly important because it may be used to determine the frequency selectivity of a circuit (like a superheterodyne radio receiver) to excitations of different frequencies. For this reason, every manufacturer of electronics test equipment builds sinusoidal oscillators that may be swept through many octaves of Orequency. (Hewlett-Packard was started in 1940 with the famous HP audio oscillator.)

In this chapter we use what we have learned about complex numbers and the function e j θ to develop a phasor calculus for representing and ma- nipulating sinusoids. This calculus operates very much like the calculus wedeveloped in "Complex Numbers" and "The Functions e x and e " for manipulating complex numbers. We ap- ply our calculus to the study of beating phenomena, multiphase power, series RLC circuits, and light scattering by a slit.

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, A first course in electrical and computer engineering. OpenStax CNX. Sep 14, 2009 Download for free at http://cnx.org/content/col10685/1.2
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'A first course in electrical and computer engineering' conversation and receive update notifications?

Ask