<< Chapter < Page Chapter >> Page >
Phần này trình bày về các khái niệm về hệ truyền động điện tự động

Mục đích và yêu cầu:

+ Nắm được cấu trúc chung của hệ thống truyền động điện tự động (HT-TĐĐTĐ).

+ Nắm được đặc tính của từng loại động cơ trong các hệ thống truyền động điện tự động cụ thể.

+ Phân tích được các phương pháp điều chỉnh tốc độ động cơ và vấn đề điều chỉnh tốc độ trong các hệ “bộ biến đổi - động cơ ”.

+ Khảo sát được quá trình quá độ của HT-TĐĐTĐ với các thông số của hệ hoặc của phụ tải.

+ Tính chọn các phương án truyền động và nắm được nguyên tắc cơ bản để chọn công suất động cơ điện.

+ Nắm được các nguyên tắc cơ bản điều khiển tự động HT-TĐĐTĐ.

+ Phân tích và đánh giá được các mạch điều khiển tự động điển hình của các máy hoặc hệ thống đã có sẵn.

+ Nắm được nguyên tắc làm việc của phần tử điều khiển logic.

+ Tổng hợp được một số mạch điều khiển logic.

+ Thiết kế được các mạch điều khiển tự động của các máy hoặc hệ thống theo yêu cầu công nghệ.

Cấu trúc và phân loại hệ thống truyền động điện tự động (tđđ tđ)

Cấu trúc của hệ thống truyền động điện tự động:

* định nghĩa hệ thống truyền động điện tự động:

+ Hệ truyền động điện tự động (TĐĐ TĐ) là một tổ hợp các thiết bị điện, điện tử, v.v. phục vụ cho cho việc biến đổi điện năng thành cơ năng cung cấp cho các cơ cấu công tác trên các máy sản suất, cũng như gia công truyền tín hiệu thông tin để điều khiển quá trình biến đổi năng lượng đó theo yêu cầu công nghệ.

* cấu trúc chung:

Hình 1-1: Mô tả cấu trúc chung của hệ TĐĐ TĐBBĐ: Bộ biến đổi; ĐC: Động cơ điện; MSX: Máy sản xuất; R và RT: Bộ điều chỉnh truyền động và công nghệ; K và KT: các Bộ đóng cắt phục vụ truyền động và công nghệ; GN: Mạch ghép nối; VH: Người vận hànhGNVHBBĐĐCMSXRRTKKTLướiPhần điệnPhần cơ

Cấu trúc của hệ TĐĐ TĐ gồm 2 phần chính:

- Phần lực (mạch lực): từ lưới điện hoặc nguồn điện cung cấp điện năng đến bộ biến đổi (BBĐ) và động cơ điện (ĐC) truyền động cho phụ tải (MSX). Các bộ biến đổi như: bộ biến đổi máy điện (máy phát điện một chiều, xoay chiều, máy điện khuếch đại), bộ biến đổi điện từ (khuếch đại từ, cuộn kháng bảo hoà), bộ biến đổi điện tử, bán dẫn (Chỉnh lưu tiristor, bộ điều áp một chiều, biến tần transistor, tiristor). Động cơ có các loại như: động cơ một chiều, xoay chiều, các loại động cơ đặc biệt.

- Phần điều khiển (mạch điều khiển) gồm các cơ cấu đo lường, các bộ điều chỉnh tham số và công nghệ, các khí cụ, thiết bị điều khiển đóng cắt phục vụ công nghệ và cho người vận hành. Đồng thời một số hệ TĐĐ TĐ khác có cả mạch ghép nối với các thiết bị tự động khác hoặc với máy tính điều khiển.

Phân loại hệ thống truyền động điện tự động:

- Truyền động điện không điều chỉnh: thường chỉ có động cơ nối trực tiếp với lưới điện, quay máy sản xuất với một tốc độ nhất định.

- Truyền động có điều chỉnh: tuỳ thuộc vào yêu cầu công nghệ mà ta có hệ truyền động điện điều chỉnh tốc độ, hệ truyền động điện tự động điều chỉnh mô men, lực kéo, và hệ truyền động điện tự động điều chỉnh vị trí. Trong hệ này có thể là hệ truyền động điện tự động nhiều động cơ.

- Theo cấu trúc và tín hiệu điều khiển mà ta có hệ truyền động điện tự động điều khiển số, hệ truyền động điện tự động điều khiển tương tự, hệ truyền động điện tự động điều khiển theo chương trình ...

Questions & Answers

Three charges q_{1}=+3\mu C, q_{2}=+6\mu C and q_{3}=+8\mu C are located at (2,0)m (0,0)m and (0,3) coordinates respectively. Find the magnitude and direction acted upon q_{2} by the two other charges.Draw the correct graphical illustration of the problem above showing the direction of all forces.
Kate Reply
To solve this problem, we need to first find the net force acting on charge q_{2}. The magnitude of the force exerted by q_{1} on q_{2} is given by F=\frac{kq_{1}q_{2}}{r^{2}} where k is the Coulomb constant, q_{1} and q_{2} are the charges of the particles, and r is the distance between them.
Muhammed
What is the direction and net electric force on q_{1}= 5µC located at (0,4)r due to charges q_{2}=7mu located at (0,0)m and q_{3}=3\mu C located at (4,0)m?
Kate Reply
what is the change in momentum of a body?
Eunice Reply
what is a capacitor?
Raymond Reply
Capacitor is a separation of opposite charges using an insulator of very small dimension between them. Capacitor is used for allowing an AC (alternating current) to pass while a DC (direct current) is blocked.
Gautam
A motor travelling at 72km/m on sighting a stop sign applying the breaks such that under constant deaccelerate in the meters of 50 metres what is the magnitude of the accelerate
Maria Reply
please solve
Sharon
8m/s²
Aishat
What is Thermodynamics
Muordit
velocity can be 72 km/h in question. 72 km/h=20 m/s, v^2=2.a.x , 20^2=2.a.50, a=4 m/s^2.
Mehmet
A boat travels due east at a speed of 40meter per seconds across a river flowing due south at 30meter per seconds. what is the resultant speed of the boat
Saheed Reply
50 m/s due south east
Someone
which has a higher temperature, 1cup of boiling water or 1teapot of boiling water which can transfer more heat 1cup of boiling water or 1 teapot of boiling water explain your . answer
Ramon Reply
I believe temperature being an intensive property does not change for any amount of boiling water whereas heat being an extensive property changes with amount/size of the system.
Someone
Scratch that
Someone
temperature for any amount of water to boil at ntp is 100⁰C (it is a state function and and intensive property) and it depends both will give same amount of heat because the surface available for heat transfer is greater in case of the kettle as well as the heat stored in it but if you talk.....
Someone
about the amount of heat stored in the system then in that case since the mass of water in the kettle is greater so more energy is required to raise the temperature b/c more molecules of water are present in the kettle
Someone
definitely of physics
Haryormhidey Reply
how many start and codon
Esrael Reply
what is field
Felix Reply
physics, biology and chemistry this is my Field
ALIYU
field is a region of space under the influence of some physical properties
Collete
what is ogarnic chemistry
WISDOM Reply
determine the slope giving that 3y+ 2x-14=0
WISDOM
Another formula for Acceleration
Belty Reply
a=v/t. a=f/m a
IHUMA
innocent
Adah
pratica A on solution of hydro chloric acid,B is a solution containing 0.5000 mole ofsodium chlorid per dm³,put A in the burret and titrate 20.00 or 25.00cm³ portion of B using melting orange as the indicator. record the deside of your burret tabulate the burret reading and calculate the average volume of acid used?
Nassze Reply
how do lnternal energy measures
Esrael
Two bodies attract each other electrically. Do they both have to be charged? Answer the same question if the bodies repel one another.
JALLAH Reply
No. According to Isac Newtons law. this two bodies maybe you and the wall beside you. Attracting depends on the mass och each body and distance between them.
Dlovan
Are you really asking if two bodies have to be charged to be influenced by Coulombs Law?
Robert
like charges repel while unlike charges atttact
Raymond
What is specific heat capacity
Destiny Reply
Specific heat capacity is a measure of the amount of energy required to raise the temperature of a substance by one degree Celsius (or Kelvin). It is measured in Joules per kilogram per degree Celsius (J/kg°C).
AI-Robot
specific heat capacity is the amount of energy needed to raise the temperature of a substance by one degree Celsius or kelvin
ROKEEB
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Giáo trình truyền động điện tự động. OpenStax CNX. Jul 30, 2009 Download for free at http://cnx.org/content/col10827/1.1
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Giáo trình truyền động điện tự động' conversation and receive update notifications?

Ask