<< Chapter < Page Chapter >> Page >
Power dissipation in resistor circuits.

We can find voltages and currents in simple circuits containing resistors and voltage or current sources.We should examine whether these circuits variables obey the Conservation of Power principle:since a circuit is a closed system, it should not dissipate or create energy.For the moment, our approach is to investigate first a resistor circuit's power consumption/creation. Later, we will prove that because of KVL and KCL all circuits conserve power.

As defined on [link] , the instantaneous power consumed/created by every circuit element equals the product of itsvoltage and current. The total power consumed/created by a circuit equals the sum of eachelement's power. P k k v k i k Recall that each element's current and voltage must obey the convention that positive current is defined to enter the positive-voltage terminal.With this convention, a positive value of v k i k corresponds to consumed power, a negative value to created power. Because the total power in a circuit must be zero( P 0 ), some circuit elements must create power while others consume it.

Consider the simple series circuit should in [link] . In performing our calculations, we defined the current i out to flow through the positive-voltage terminals of both resistors and found it to equal i out v in R 1 R 2 . The voltage across the resistor R 2 is the output voltage and we found it to equal v out R 2 R 1 R 2 v in . Consequently, calculating the power for this resistor yields P 2 R 2 R 1 R 2 2 v in 2 Consequently, this resistor dissipates power because P 2 is positive. This result should not be surprising since we showed that the power consumedby any resistor equals either of the following.

v 2 R   or   i 2 R
Since resistors are positive-valued, resistors always dissipate power . But where does a resistor's power go?By Conservation of Power, the dissipated power must be absorbed somewhere. The answer is not directly predicted by circuit theory, but is by physics.Current flowing through a resistor makes it hot; its power is dissipated by heat.
A physical wire has a resistance and hence dissipates power (it gets warm just like a resistor in a circuit).In fact, the resistance of a wire of length L and cross-sectional area A is given by R ρ L A The quantity ρ is known as the resistivity and presents the resistance of a unit-length, unit cross-sectional area material constituting the wire.Resistivity has units of ohm-meters. Most materials have a positive value for ρ , which means the longer the wire, the greater the resistance and thus thepower dissipated. The thicker the wire, the smaller the resistance.Superconductors have zero resistivity and hence do not dissipate power. If a room-temperature superconductor could be found, electric power could besent through power lines without loss!

Calculate the power consumed/created by the resistor R 1 in our simple circuit example.

The power consumed by the resistor R 1 can be expressed as v in v out i out R 1 R 1 R 2 2 v in 2

Got questions? Get instant answers now!

We conclude that both resistors in our example circuit consume power, which points to the voltage source as the producer of power.The current flowing into the source's positive terminal is i out . Consequently, the power calculation for the source yields v in i out 1 R 1 R 2 v in 2 We conclude that the source provides the power consumed by the resistors, no more, no less.

Confirm that the source produces exactly the total power consumed by both resistors.

1 R 1 R 2 v in 2 R 1 R 1 R 2 2 v in 2 R 2 R 1 R 2 2 v in 2

Got questions? Get instant answers now!

This result is quite general: sources produce power and the circuit elements, especially resistors,consume it. But where do sources get their power?Again, circuit theory does not model how sources are constructed, but the theory decrees that all sources must be provided energy to work.

Questions & Answers

what is mutation
Janga Reply
what is a cell
Sifune Reply
how is urine form
Sifune
what is antagonism?
mahase Reply
classification of plants, gymnosperm features.
Linsy Reply
what is the features of gymnosperm
Linsy
how many types of solid did we have
Samuel Reply
what is an ionic bond
Samuel
What is Atoms
Daprince Reply
what is fallopian tube
Merolyn
what is bladder
Merolyn
what's bulbourethral gland
Eduek Reply
urine is formed in the nephron of the renal medulla in the kidney. It starts from filtration, then selective reabsorption and finally secretion
onuoha Reply
State the evolution relation and relevance between endoplasmic reticulum and cytoskeleton as it relates to cell.
Jeremiah
what is heart
Konadu Reply
how is urine formed in human
Konadu
how is urine formed in human
Rahma
what is the diference between a cavity and a canal
Pelagie Reply
what is the causative agent of malaria
Diamond
malaria is caused by an insect called mosquito.
Naomi
Malaria is cause by female anopheles mosquito
Isaac
Malaria is caused by plasmodium Female anopheles mosquitoe is d carrier
Olalekan
a canal is more needed in a root but a cavity is a bad effect
Commander
what are pathogens
Don Reply
In biology, a pathogen (Greek: πάθος pathos "suffering", "passion" and -γενής -genēs "producer of") in the oldest and broadest sense, is anything that can produce disease. A pathogen may also be referred to as an infectious agent, or simply a germ. The term pathogen came into use in the 1880s.[1][2
Zainab
A virus
Commander
Definition of respiration
Muhsin Reply
respiration is the process in which we breath in oxygen and breath out carbon dioxide
Achor
how are lungs work
Commander
where does digestion begins
Achiri Reply
in the mouth
EZEKIEL
what are the functions of follicle stimulating harmones?
Rashima Reply
stimulates the follicle to release the mature ovum into the oviduct
Davonte
what are the functions of Endocrine and pituitary gland
Chinaza
endocrine secrete hormone and regulate body process
Achor
while pituitary gland is an example of endocrine system and it's found in the Brain
Achor
what's biology?
Egbodo Reply
Biology is the study of living organisms, divided into many specialized field that cover their morphology, physiology,anatomy, behaviour,origin and distribution.
Lisah
biology is the study of life.
Alfreda
Biology is the study of how living organisms live and survive in a specific environment
Sifune
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Fundamentals of electrical engineering i. OpenStax CNX. Aug 06, 2008 Download for free at http://legacy.cnx.org/content/col10040/1.9
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Fundamentals of electrical engineering i' conversation and receive update notifications?

Ask