# 0.2 Labview implementation of 2d array delay and sum beamformer

 Page 1 / 3
This module describes our implementation in Labview of an eight microphone, two-dimensional array beamformer. Due to the relatively small size of the beamformer, it was implemented using a delay and sum algorithm in the time domain.

## Introduction

Our project involves using a two-dimensional array of microphones to determine the direction from which a mystery signal comes. This involves taking data from the microphones , doing analysis of the data, and then outputting the results. The second step we chose to implement in Labview. In order to interface correctly with the DAQ card we had available, we used Labview 5.1.

The labview implementation of our project involved several stages: First, we wrote a vi designed to get the input from the microphones by sampling the eight inputs to the DAQ card, and separate the resulting data into eight arrays, each holding a digitized signal. We then upsampled each array (using a separate vi for that purpose) and passed the upsampled signals to the main analysis vi .

The main analysis vi tests three of the signals by taking two of them and testing them individually against the third. This test involves delaying the two signals and taking the norm of the delayed signal and the third signal. Each norm is collected in an array, from which the max norm -- correspondent to the correct delay between the two signals -- can be found.

If we know the correct delays between three signals, we can do some mathematics (explained in greater depth in the section on the delay generation vi ) and derive the angles the signal is coming from.

As a two-dimensional array has the ability to discern a point in three-dimensional space, there are two angles found here: theta , the angle along the xy plane, and phi , the angle relative to the z axis.

From the angles found, we can then calculate the appropriate delays to be applied to the other five signals. Finally, we take all eight signals, delay them appropriately, and add them together to get our final result. This is known as delay and sum beamforming .

## Waveform generation vi

Most of the work here was done for us already, through Labview's Generate Waveforms VI , a module that, given certain information about an attached DAQ card, sampling rate, time to be sampled, etc., will seek out that DAQ card, sample the requested channels, and return the results in a two-dimensional array of doubles, where one dimension corresponds to the sample of the signal at one particular point in time, and the other to which channel sampled from.

Our module took the data from said VI and separated it into eight one-dimensional arrays, one for each microphone. (This was an essential step, as many of the array analysis functions that we wished to use would only work with one-dimensional arrays.) Using our Upsampling VI (discussed below), we then upsampled the signals, lowpass filtered them to interpolate the signal, and set the eight filtered and upsampled signals as the output of this VI. This module takes as an input N, the amount by which the signals should be upsampled, and an input fs, the sampling frequency.

how can chip be made from sand
is this allso about nanoscale material
Almas
are nano particles real
yeah
Joseph
Hello, if I study Physics teacher in bachelor, can I study Nanotechnology in master?
no can't
Lohitha
where is the latest information on a no technology how can I find it
William
currently
William
where we get a research paper on Nano chemistry....?
nanopartical of organic/inorganic / physical chemistry , pdf / thesis / review
Ali
what are the products of Nano chemistry?
There are lots of products of nano chemistry... Like nano coatings.....carbon fiber.. And lots of others..
learn
Even nanotechnology is pretty much all about chemistry... Its the chemistry on quantum or atomic level
learn
da
no nanotechnology is also a part of physics and maths it requires angle formulas and some pressure regarding concepts
Bhagvanji
hey
Giriraj
Preparation and Applications of Nanomaterial for Drug Delivery
revolt
da
Application of nanotechnology in medicine
has a lot of application modern world
Kamaluddeen
yes
narayan
what is variations in raman spectra for nanomaterials
ya I also want to know the raman spectra
Bhagvanji
I only see partial conversation and what's the question here!
what about nanotechnology for water purification
please someone correct me if I'm wrong but I think one can use nanoparticles, specially silver nanoparticles for water treatment.
Damian
yes that's correct
Professor
I think
Professor
Nasa has use it in the 60's, copper as water purification in the moon travel.
Alexandre
nanocopper obvius
Alexandre
what is the stm
is there industrial application of fullrenes. What is the method to prepare fullrene on large scale.?
Rafiq
industrial application...? mmm I think on the medical side as drug carrier, but you should go deeper on your research, I may be wrong
Damian
How we are making nano material?
what is a peer
What is meant by 'nano scale'?
What is STMs full form?
LITNING
scanning tunneling microscope
Sahil
how nano science is used for hydrophobicity
Santosh
Do u think that Graphene and Fullrene fiber can be used to make Air Plane body structure the lightest and strongest. Rafiq
Rafiq
what is differents between GO and RGO?
Mahi
what is simplest way to understand the applications of nano robots used to detect the cancer affected cell of human body.? How this robot is carried to required site of body cell.? what will be the carrier material and how can be detected that correct delivery of drug is done Rafiq
Rafiq
if virus is killing to make ARTIFICIAL DNA OF GRAPHENE FOR KILLED THE VIRUS .THIS IS OUR ASSUMPTION
Anam
analytical skills graphene is prepared to kill any type viruses .
Anam
Any one who tell me about Preparation and application of Nanomaterial for drug Delivery
Hafiz
what is Nano technology ?
write examples of Nano molecule?
Bob
The nanotechnology is as new science, to scale nanometric
brayan
nanotechnology is the study, desing, synthesis, manipulation and application of materials and functional systems through control of matter at nanoscale
Damian
Got questions? Join the online conversation and get instant answers!