<< Chapter < Page Chapter >> Page >

Bromine exists exclusively as bromide salts in the Earth’s crust, however, due to leaching, bromide salts have accumulated in sea water, but at a lower concentration than chloride. The majority of bromine is isolated from bromine-rich brines, which are treated with chlorine gas, flushing through with air. In this treatment, bromide anions are oxidized to bromine by the chlorine gas, [link] .

Two major sources of iodine are used for commercial production: the caliche (a hardened sedimentary deposit of calcium carbonate found in Chile) and the iodine containing brines of gas and oil fields in Japan and the United States. The caliche contains sodium nitrate (NaNO 3 ); in which traces of sodium iodate (NaIO 3 ) and sodium iodide (NaI) are found. During the production of sodium nitrate the sodium iodate and iodide is extracted. Iodine sourced from brine involves the acidification with sulfuric acid to form hydrogen iodide (HI), which is then oxidized to iodine with chlorine, [link] . The aqueous iodine solution is concentrated by passing air through the solution causing the iodine to evaporate. The iodine solution is then re-reduced with sulfur dioxide, [link] . The dry hydrogen iodide (HI) is reacted with chlorine to precipitate the iodine, [link] .

Physical properties

The physical properties of the halogens ( [link] ) encompasses gases (F 2 and Cl 2 ), a liquid (Br 2 ), a non-metallic solid (I 2 ), and a metallic metal (At).

Selected physical properties of the halogens.
Element Mp (°C) Bp (°C) Density (g/cm 3 )
F -219.62 -188.12 1.7 x 10 -3 @ 0 °C, 101 kPa
Cl -101.5 -34.04 3.2 x 10 -3 @ 0 °C, 101 kPa
Br -7.2 58.8 3.1028 (liquid)
I 113.7 184.3 4.933
At 302 337 ca . 7

Reactivity

All the halogens are highly reactive and are as a consequence of the stability of the X - ion are strong oxidizing agents ( [link] ).

Electrochemical reduction potential for halogens.
Reduction Reduction potential (V)
F 2 + 2 e - → 2 F - 2.87
Cl 2 + 2 e - → 2 Cl - 1.36
Br 2 + 2 e - → 2 Br - 1.07
I 2 + 2 e - → 2 I - 0.53
Elemental fluorine (fluorine gas) is a highly toxic, corrosive oxidant, which can cause ignition of organic material. Fluorine gas has a characteristic pungent odor that is detectable in concentrations as low as 20 ppb. As it is so reactive, all materials of construction must be carefully selected and metal surfaces must be passivated. In high concentrations, soluble fluoride salts are also toxic and skin or eye contact with high concentrations of many fluoride salts is dangerous.

Use of chlorine as a weapon

Chlorine gas, also known as bertholite , was first used as a weapon in World War I by Germany on April 22, 1915 in the Second Battle of Ypres. At around 5:00 pm on April 22, 1915, the German Army released one hundred and sixty eight tons of chlorine gas over a 4 mile front against French and colonial Moroccan and Algerian troops of the French 45 th and 78 th divisions ( [link] ). The attack involved a massive logistical effort, as German troops hauled 5730 cylinders of chlorine gas, weighing ninety pounds each, to the front by hand. The German soldiers also opened the cylinders by hand, relying on the prevailing winds to carry the gas towards enemy lines. Because of this method of dispersal, a large number of German soldiers were injured or killed in the process of carrying out the attack. Approximately 6,000 French and colonial troops died within ten minutes at Ypres, primarily from asphyxiation and subsequent tissue damage in the lungs. Many more were blinded. Chlorine gas forms hydrochloric acid when combined with water, destroying moist tissues such as lungs and eyes. The chlorine gas, being denser than air, quickly filled the trenches, forcing the troops to climb out into heavy enemy fire.

The gas attack of the Second Battle of Ypres.

As described by the soldiers it had a distinctive smell of a mixture between pepper and pineapple. It also tasted metallic and stung the back of the throat and chest. The damage done by chlorine gas can be prevented by a gas mask, or other filtration method, making the fatalities from a chlorine gas attack much lower than those of other chemical weapons. The use as a weapon was pioneered by Fritz Haber ( [link] ) of the Kaiser Wilhelm Institute in Berlin, in collaboration with the German chemical conglomerate IG Farben, who developed methods for discharging chlorine gas against an entrenched enemy. It is alleged that Haber's role in the use of chlorine as a deadly weapon drove his wife, Clara Immerwahr, to suicide. After its first use, chlorine was used by both sides as a chemical weapon ( [link] ), but it was soon replaced by the more deadly gases phosgene and mustard gas.

German scientist and Nobel Prize winner Fritz Haber (1868 - 1934).
A poison gas attack, in World War I.

Vapor phase

All the halogens form X 2 dimers in the vapor phase in an analogous manner to hydrogen. Unlike dihydrogen, however, the bonding is associated with the molecular orbital combination of the two p-orbitals ( [link] ). The bond lengths and energies are given in [link] .

Molecular orbital diagram for the formation of F 2 .
Bond lengths and energies for halogens.
Element Bond length (Å) Energy (kJ/mol)
F 2 1.42 158
Cl 2 1.99 243
Br 2 2.29 193
I 2 2.66 151

Solid state

Iodine crystallizes in the orthorhombic space group Cmca ( [link] ). In the solid state, I 2 molecules still contain short I-I bond (2.70 Å).

The solid state structure of I 2 .

Compounds of the halogens.

The chemistry of the halogens is dominated by the stability of the -1 oxidation state and the noble gas configuration of the X - anion.

Oxidation state

The use of oxidation state for fluorine is almost meaningless since as the most electronegative element, fluorine exists in the oxidation state of -1 in all its compounds, except elemental fluorine (F 2 ) where the oxidation state is zero by definition. Despite the general acceptance that the halogen elements form the associated halide anion (X - ), compounds with oxidation states of +1, +3, +4, +5, and +7 are common for chlorine, bromine, and iodine ( [link] ).

Examples of multiple oxidation states for the halogens.
Element -1 +1 +3 +4 +5 +7
Cl HCl ClF ClF 3 , HClO 2 ClO 2 ClF 5 , ClO 3 - HClO 4
Br HBr BrCl BrF 3 Br 2 O 4 BrF 5 , BrO 3 - BrO 4 -
I HI ICl IF 3 , ICl 3 I 2 O 4 IO 3 - IO 4 -

Bibliography

  • G. Agricola, De Re Metallica , Dover Publications, UK (1950)
  • K. Christe, Inorg. Chem. , 1986, 25 , 3721.

Questions & Answers

what is variations in raman spectra for nanomaterials
Jyoti Reply
I only see partial conversation and what's the question here!
Crow Reply
what about nanotechnology for water purification
RAW Reply
please someone correct me if I'm wrong but I think one can use nanoparticles, specially silver nanoparticles for water treatment.
Damian
yes that's correct
Professor
I think
Professor
what is the stm
Brian Reply
is there industrial application of fullrenes. What is the method to prepare fullrene on large scale.?
Rafiq
industrial application...? mmm I think on the medical side as drug carrier, but you should go deeper on your research, I may be wrong
Damian
How we are making nano material?
LITNING Reply
what is a peer
LITNING Reply
What is meant by 'nano scale'?
LITNING Reply
What is STMs full form?
LITNING
scanning tunneling microscope
Sahil
how nano science is used for hydrophobicity
Santosh
Do u think that Graphene and Fullrene fiber can be used to make Air Plane body structure the lightest and strongest. Rafiq
Rafiq
what is differents between GO and RGO?
Mahi
what is simplest way to understand the applications of nano robots used to detect the cancer affected cell of human body.? How this robot is carried to required site of body cell.? what will be the carrier material and how can be detected that correct delivery of drug is done Rafiq
Rafiq
what is Nano technology ?
Bob Reply
write examples of Nano molecule?
Bob
The nanotechnology is as new science, to scale nanometric
brayan
nanotechnology is the study, desing, synthesis, manipulation and application of materials and functional systems through control of matter at nanoscale
Damian
Is there any normative that regulates the use of silver nanoparticles?
Damian Reply
what king of growth are you checking .?
Renato
What fields keep nano created devices from performing or assimulating ? Magnetic fields ? Are do they assimilate ?
Stoney Reply
why we need to study biomolecules, molecular biology in nanotechnology?
Adin Reply
?
Kyle
yes I'm doing my masters in nanotechnology, we are being studying all these domains as well..
Adin
why?
Adin
what school?
Kyle
biomolecules are e building blocks of every organics and inorganic materials.
Joe
anyone know any internet site where one can find nanotechnology papers?
Damian Reply
research.net
kanaga
sciencedirect big data base
Ernesto
Introduction about quantum dots in nanotechnology
Praveena Reply
what does nano mean?
Anassong Reply
nano basically means 10^(-9). nanometer is a unit to measure length.
Bharti
do you think it's worthwhile in the long term to study the effects and possibilities of nanotechnology on viral treatment?
Damian Reply
absolutely yes
Daniel
how did you get the value of 2000N.What calculations are needed to arrive at it
Smarajit Reply
Privacy Information Security Software Version 1.1a
Good
waht is hydrating power of lithium carbonates
Mahar Reply

Get the best Algebra and trigonometry course in your pocket!





Source:  OpenStax, Chemistry of the main group elements. OpenStax CNX. Aug 20, 2010 Download for free at http://cnx.org/content/col11124/1.25
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Chemistry of the main group elements' conversation and receive update notifications?

Ask