<< Chapter < Page Chapter >> Page >

The barbershop problem

The original barbershop problem was proposed by Dijkstra. A variation of it appears in Silberschatz and Galvin’s OperatingSystems Concepts. A barbershop consists of a waiting room with n chairs, and the barber room containing the barber chair. If there are no customers to be served,the barber goes to sleep. If a customer enters the barbershop and all chairs are occupied, then the customer leaves the shop. If the barber is busy, but chairsare available, then the customer sits in one of the free chairs. If the barber is asleep, the customer wakes up the barber. Write a program to coordinate thebarber and the customers.

Scheduling

Until now we have talked about processes, from now on we will talk about resources, the things operated upon by processes. Resourcesrange from cpu time to disk space to channel I/O time.

Resources fall into two classes:

  • Preemptible: processor or I/O channel. Can take resource away, use it for something else, then give it back later.
  • Non-preemptible: once given, it cannot be reused until process gives it back. Examples are file space, terminal, and maybe memory.

OS makes two related kinds of decisions about resources:

  • Allocation: who gets what. Given a set of requests for resources, which processes should be given which resources in order to make most efficientuse of the resources? Implication is that resources are not easily preemptible.
  • Scheduling: how long can they keep it. When more resources are requested than can be granted immediately, in which order should they beserviced? Examples are processor scheduling (one processor, many processes), memory scheduling in virtual memory systems. Implication is that resource ispreemptible.

Cpu scheduling

Processes may be in any one of three general scheduling states:

  • Running.
  • Ready. That is, waiting for CPU time. Scheduler and dispatcher determine transitions between this and running state.
  • Blocked. Waiting for some other event: disk I/O, message, semaphore, etc. Transitions into and out of this state are caused by variousprocesses.

There are two parts to CPU scheduling:

  • The dispatcher provides the basic mechanism for running processes.
  • The scheduler is a piece of OS code that decides the priorities of processes and how long each will run.

This is an example of policy/mechanism separation.

Goals for Scheduling Disciplines

  • Efficiency of resource utilization (keep CPU and disks busy).
  • Minimize overhead (context swaps).
  • Minimize response time. (Define response time.)
  • Distribute cycles equitably. What does this mean?

Fcfs (also called fifo)

Run until finished.

  • In the simplest case this means uniprogramming.
  • Usually, "finished" means "blocked". One process can use CPU while another waits on a semaphore. Go to back of run queue when ready.
  • Problem: one process can monopolize CPU.

Solution: limit maximum amount of time that a process can run without a context switch. This time is called a time slice.

Round robin

Run process for one time slice, then move to back of queue. Each process gets equal share of the CPU. Most systems use somevariant of this. What happens if the time slice is not chosen carefully?

Questions & Answers

Three charges q_{1}=+3\mu C, q_{2}=+6\mu C and q_{3}=+8\mu C are located at (2,0)m (0,0)m and (0,3) coordinates respectively. Find the magnitude and direction acted upon q_{2} by the two other charges.Draw the correct graphical illustration of the problem above showing the direction of all forces.
Kate Reply
To solve this problem, we need to first find the net force acting on charge q_{2}. The magnitude of the force exerted by q_{1} on q_{2} is given by F=\frac{kq_{1}q_{2}}{r^{2}} where k is the Coulomb constant, q_{1} and q_{2} are the charges of the particles, and r is the distance between them.
Muhammed
What is the direction and net electric force on q_{1}= 5µC located at (0,4)r due to charges q_{2}=7mu located at (0,0)m and q_{3}=3\mu C located at (4,0)m?
Kate Reply
what is the change in momentum of a body?
Eunice Reply
what is a capacitor?
Raymond Reply
Capacitor is a separation of opposite charges using an insulator of very small dimension between them. Capacitor is used for allowing an AC (alternating current) to pass while a DC (direct current) is blocked.
Gautam
A motor travelling at 72km/m on sighting a stop sign applying the breaks such that under constant deaccelerate in the meters of 50 metres what is the magnitude of the accelerate
Maria Reply
please solve
Sharon
8m/s²
Aishat
What is Thermodynamics
Muordit
velocity can be 72 km/h in question. 72 km/h=20 m/s, v^2=2.a.x , 20^2=2.a.50, a=4 m/s^2.
Mehmet
A boat travels due east at a speed of 40meter per seconds across a river flowing due south at 30meter per seconds. what is the resultant speed of the boat
Saheed Reply
50 m/s due south east
Someone
which has a higher temperature, 1cup of boiling water or 1teapot of boiling water which can transfer more heat 1cup of boiling water or 1 teapot of boiling water explain your . answer
Ramon Reply
I believe temperature being an intensive property does not change for any amount of boiling water whereas heat being an extensive property changes with amount/size of the system.
Someone
Scratch that
Someone
temperature for any amount of water to boil at ntp is 100⁰C (it is a state function and and intensive property) and it depends both will give same amount of heat because the surface available for heat transfer is greater in case of the kettle as well as the heat stored in it but if you talk.....
Someone
about the amount of heat stored in the system then in that case since the mass of water in the kettle is greater so more energy is required to raise the temperature b/c more molecules of water are present in the kettle
Someone
definitely of physics
Haryormhidey Reply
how many start and codon
Esrael Reply
what is field
Felix Reply
physics, biology and chemistry this is my Field
ALIYU
field is a region of space under the influence of some physical properties
Collete
what is ogarnic chemistry
WISDOM Reply
determine the slope giving that 3y+ 2x-14=0
WISDOM
Another formula for Acceleration
Belty Reply
a=v/t. a=f/m a
IHUMA
innocent
Adah
pratica A on solution of hydro chloric acid,B is a solution containing 0.5000 mole ofsodium chlorid per dm³,put A in the burret and titrate 20.00 or 25.00cm³ portion of B using melting orange as the indicator. record the deside of your burret tabulate the burret reading and calculate the average volume of acid used?
Nassze Reply
how do lnternal energy measures
Esrael
Two bodies attract each other electrically. Do they both have to be charged? Answer the same question if the bodies repel one another.
JALLAH Reply
No. According to Isac Newtons law. this two bodies maybe you and the wall beside you. Attracting depends on the mass och each body and distance between them.
Dlovan
Are you really asking if two bodies have to be charged to be influenced by Coulombs Law?
Robert
like charges repel while unlike charges atttact
Raymond
What is specific heat capacity
Destiny Reply
Specific heat capacity is a measure of the amount of energy required to raise the temperature of a substance by one degree Celsius (or Kelvin). It is measured in Joules per kilogram per degree Celsius (J/kg°C).
AI-Robot
specific heat capacity is the amount of energy needed to raise the temperature of a substance by one degree Celsius or kelvin
ROKEEB
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Operating systems. OpenStax CNX. Aug 13, 2009 Download for free at http://cnx.org/content/col10785/1.2
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Operating systems' conversation and receive update notifications?

Ask