# 0.1 Decibel scale with signal processing applications

 Page 1 / 1
Introduces the decibel scale and shows typical calculations for signal processing applications.

## Introduction

The concept of decibel originates from telephone engineers who were working with power loss in a telephoneline consisting of cascaded circuits. The power loss in each circuit is the ratio of the power in to the power out, or equivivalently, the power gain isthe ratio of the power out to the power in.

Let ${P}_{\mathrm{in}}$ be the power input to a telephone line and ${P}_{\mathrm{out}}$ the power out. The power gain is then given by

$\mathrm{Gain}=\frac{{P}_{\mathrm{out}}}{{P}_{\mathrm{in}}}$
Taking the logarithm of the gain formula we obtain acomparative measure called Bel.
$\mathrm{Gain}(\text{Bel})=\lg \left(\frac{{P}_{\mathrm{out}}}{{P}_{\mathrm{in}}}\right)$
This measure is in honour of Alexander G. Bell, see .

## Decibel

Bel is often a to large quantity, so we define a more useful measure, decibel:

$\mathrm{Gain}(\text{dB})=10\lg \left(\frac{{P}_{\mathrm{out}}}{{P}_{\mathrm{in}}}\right)$
Please note from the definition that the gain in dB is relative to the input power.In general we define:
$\mathrm{Number of decibels}=10\lg \left(\frac{P}{{P}_{\mathrm{ref}}}\right)$

If no reference level is given it is customary to use ${P}_{\mathrm{ref}}=1 W$ , in which case we have:

$\mathrm{Number of decibels}=10\lg P()$

Given the power spectrum density (psd) function of a signal $x(n)$ , ${S}_{\mathrm{xx}}(if)$ . Express the magnitude of the psd in decibels.

We find ${S}_{\mathrm{xx}}(\text{dB})=10\lg \left|{S}_{\mathrm{xx}}(if)\right|$ .

Above we’ve calculated the decibel equivalent of power. Power is a quadratic variable, whereas voltageand current are linear variables. This can be seen, for example, from the formulas $P=\frac{V^{2}}{R}$ and $P=I^{2}R$ .

So if we want to find the decibel value of a current or voltage, or more general an amplitude we use:

$\mathrm{Amplitude}(\text{dB})=20\lg \left(\frac{\mathrm{Amplitude}}{{\mathrm{Amplitude}}_{\mathrm{ref}}}\right)$
This is illustrated in the following example.

Express the magnitude of the filter $H(if)$ in dB scale.

The magnitude is given by $\left|H(if)\right|$ ,which gives: $\left|H(\text{dB})\right|=20\lg \left|H(if)\right|$ .

Plots of the magnitude of an example filter $\left|H(if)\right|$ and its decibel equivalent are shown in .

## Some basic arithmetic

The ratios 1,10,100, 1000 give dB values 0 dB, 10 dB, 20 dB and 30 dB respectively. This implies that an increaseof 10 dB corresponds to a ratio increase by a factor 10.

This can easily be shown: Given a ratio R we have R[dB]= 10 log R. Increasing the ratio by a factor of 10 we have: 10 log (10*R) = 10 log 10 + 10 log R = 10 dB + R dB.

Another important dB-value is 3dB. This comes from the fact that:

An increase by a factor 2 gives: an increase of 10 log 2≈3 dB. A“increase”by a factor 1/2 gives: an“increase”of 10 log 1/2≈-3 dB.

In filter terminology the cut-off frequency is a term that often appears. The cutoff frequency (for lowpass and highpass filters ), ${f}_{c}$ , is the frequency at which the squared magnitude response in dB is½. In decibel scale this corresponds to about -3 dB.

## Decibels in linear systems

In signal processing we have the following relations for linear systems:

$Y(if)=H(if)X(if)$
where X and H denotes the input signal and the filter respectively. Taking absolute values on both sides of and converting to decibels we get:
The output amplitude at a given frequency is simply given by the sum of the filter gain andthe input amplitude, both in dB.

## Other references:

Above we have used ${P}_{\mathrm{ref}}=1 W$ as a reference and obtained the standard dB measure. In some applications it is moreuseful to use ${P}_{\mathrm{ref}}=1 mW$ and we then have the dBm measure.

Another example is when calculating the gain of different antennas. Then it is customary to use an isotropic(equal radiation in all directions) antenna as a reference. So for a given antenna we can use the dBi measure. (i ->isotropic)

## Matlab files

Is there any normative that regulates the use of silver nanoparticles?
what king of growth are you checking .?
Renato
What fields keep nano created devices from performing or assimulating ? Magnetic fields ? Are do they assimilate ?
why we need to study biomolecules, molecular biology in nanotechnology?
?
Kyle
yes I'm doing my masters in nanotechnology, we are being studying all these domains as well..
why?
what school?
Kyle
biomolecules are e building blocks of every organics and inorganic materials.
Joe
anyone know any internet site where one can find nanotechnology papers?
research.net
kanaga
sciencedirect big data base
Ernesto
Introduction about quantum dots in nanotechnology
what does nano mean?
nano basically means 10^(-9). nanometer is a unit to measure length.
Bharti
do you think it's worthwhile in the long term to study the effects and possibilities of nanotechnology on viral treatment?
absolutely yes
Daniel
how to know photocatalytic properties of tio2 nanoparticles...what to do now
it is a goid question and i want to know the answer as well
Maciej
Abigail
for teaching engĺish at school how nano technology help us
Anassong
Do somebody tell me a best nano engineering book for beginners?
there is no specific books for beginners but there is book called principle of nanotechnology
NANO
what is fullerene does it is used to make bukky balls
are you nano engineer ?
s.
fullerene is a bucky ball aka Carbon 60 molecule. It was name by the architect Fuller. He design the geodesic dome. it resembles a soccer ball.
Tarell
what is the actual application of fullerenes nowadays?
Damian
That is a great question Damian. best way to answer that question is to Google it. there are hundreds of applications for buck minister fullerenes, from medical to aerospace. you can also find plenty of research papers that will give you great detail on the potential applications of fullerenes.
Tarell
what is the Synthesis, properties,and applications of carbon nano chemistry
Mostly, they use nano carbon for electronics and for materials to be strengthened.
Virgil
is Bucky paper clear?
CYNTHIA
carbon nanotubes has various application in fuel cells membrane, current research on cancer drug,and in electronics MEMS and NEMS etc
NANO
so some one know about replacing silicon atom with phosphorous in semiconductors device?
Yeah, it is a pain to say the least. You basically have to heat the substarte up to around 1000 degrees celcius then pass phosphene gas over top of it, which is explosive and toxic by the way, under very low pressure.
Harper
Do you know which machine is used to that process?
s.
how to fabricate graphene ink ?
for screen printed electrodes ?
SUYASH
What is lattice structure?
of graphene you mean?
Ebrahim
or in general
Ebrahim
in general
s.
Graphene has a hexagonal structure
tahir
On having this app for quite a bit time, Haven't realised there's a chat room in it.
Cied
what is biological synthesis of nanoparticles
how did you get the value of 2000N.What calculations are needed to arrive at it
Privacy Information Security Software Version 1.1a
Good
Got questions? Join the online conversation and get instant answers!