# 2.4 Constant acceleration  (Page 3/4)

 Page 3 / 4

Notwithstanding the constant magnitude, acceleration of uniform circular motion is a variable acceleration in the horizontal plane, because direction of radial centripetal acceleration (shown with red arrow) keeps changing with time. Therefore, the acceleration of the motion keeps changing and is not independent of time as required for acceleration to be constant.

## Equation of motion

The motion under constant acceleration allows us to describe accelerated motion, using simple mathematical construct. Here, we set out to arrive at these relationships in the form of equations. In these equations, “ u ” stands for initial velocity, “ v ” for final velocity, “ a ” for constant acceleration and “t” for time interval of motion under consideration. This is short of convention followed by many text books and hence the convention has been retained here.

## First equation

$\begin{array}{ll}\mathrm{1:}& \mathbf{v}=\mathbf{u}+\mathbf{a}t\end{array}$

This relation can be established in many ways. One of the fundamental ways is to think that velocity is changed by constant acceleration (vector) at the end of successive seconds. Following this logic, the velocity at the end of t successive seconds are as under :

$\begin{array}{lll}\text{At the end of}\phantom{\rule{2pt}{0ex}}{1}^{\mathrm{st}}\phantom{\rule{2pt}{0ex}}\text{second}& :& \mathbf{u}+\mathbf{a}\\ \text{At the end of}\phantom{\rule{2pt}{0ex}}{2}^{\mathrm{nd}}\phantom{\rule{2pt}{0ex}}\text{second}& :& \mathbf{u}+2\mathbf{a}\\ \text{At the end of}\phantom{\rule{2pt}{0ex}}{3}^{\mathrm{rd}}\phantom{\rule{2pt}{0ex}}\text{second}& :& \mathbf{u}+3\mathbf{a}\\ \text{At the end of}\phantom{\rule{2pt}{0ex}}{4}^{\mathrm{th}}\phantom{\rule{2pt}{0ex}}\text{second}& :& \mathbf{u}+4\mathbf{a}\\ \text{-------------------------------}\\ \text{-------------------------------}\\ \text{At the end of}\phantom{\rule{2pt}{0ex}}{t}^{\mathrm{th}}\phantom{\rule{2pt}{0ex}}\text{second}& :& \mathbf{u}+t\mathbf{a}=\mathbf{u}+\mathbf{a}t\end{array}$

We can also derive this equation, using the defining concept of constant acceleration. We know that :

$\begin{array}{l}\mathbf{a}={\mathbf{a}}_{\mathrm{avg}}\\ ⇒\mathbf{a}=\frac{\Delta \mathbf{v}}{\Delta t}=\frac{\mathbf{v}-\mathbf{u}}{t}\\ ⇒\mathbf{a}t=\mathbf{v}-\mathbf{u}\\ ⇒\mathbf{v}=\mathbf{u}+\mathbf{a}t\end{array}$

Alternatively (using calculus), we know that :

$\begin{array}{l}\mathbf{a}=\frac{đ\mathbf{v}}{đt}\\ ⇒đ\mathbf{v}=\mathbf{a}đt\end{array}$

Integrating on both sides, we have :

$\begin{array}{l}\Delta \mathbf{v}=\mathbf{a}\Delta t\\ ⇒{\mathbf{v}}_{2}-{\mathbf{v}}_{1}=\mathbf{a}t\\ ⇒\mathbf{v}-\mathbf{u}=\mathbf{a}t\\ ⇒\mathbf{v}=\mathbf{u}+\mathbf{a}t\end{array}$

## Second equation

$\begin{array}{ll}\mathrm{2:}& {\mathbf{v}}_{\mathrm{avg}}=\frac{\mathbf{u}+\mathbf{v}}{2}\end{array}$

The equation $\mathbf{v}=\mathbf{u}+\mathbf{a}t$ is a linear relationship. Hence, average velocity is arithmatic mean of initial and final velocities :

$\begin{array}{l}⇒{\mathbf{v}}_{\mathrm{avg}}=\frac{\mathbf{u}+\mathbf{v}}{2}\end{array}$

## Third equation

$\begin{array}{ll}\mathrm{3:}& \mathbf{s}=\Delta \mathbf{r}={\mathbf{r}}_{2}-{\mathbf{r}}_{1}=\mathbf{u}t+\frac{1}{2}\mathbf{a}{t}^{2}\end{array}$

This equation is derived by combining the two expressions available for the average velocity.

$\begin{array}{l}{\mathbf{v}}_{\mathrm{avg}}=\frac{\Delta \mathbf{r}}{\Delta t}=\frac{{\mathbf{r}}_{2}-{\mathbf{r}}_{1}}{t}\end{array}$

and

$\begin{array}{l}{\mathbf{v}}_{\mathrm{avg}}=\frac{\left({\mathbf{v}}_{1}+{\mathbf{v}}_{2}\right)}{2}=\frac{\left(\mathbf{v}+\mathbf{u}\right)}{2}\end{array}$

Combining two expressions of average acceleration and rearranging, we have :

$\begin{array}{l}⇒\left({\mathbf{r}}_{2}-{\mathbf{r}}_{1}\right)=\frac{\left(\mathbf{v}+\mathbf{u}\right)t}{2}\end{array}$

Using the relation, $\mathbf{v}=\mathbf{u}+\mathbf{a}t$ and substituting for v, we have :

$\begin{array}{l}⇒\left({\mathbf{r}}_{2}-{\mathbf{r}}_{1}\right)=\frac{\left(\mathbf{u}+\mathbf{a}t+\mathbf{u}\right)t}{2}\\ ⇒\mathbf{s}=\Delta \mathbf{r}={\mathbf{r}}_{2}-{\mathbf{r}}_{1}==\mathbf{u}t+\frac{1}{2}\mathbf{a}{t}^{2}\end{array}$

Alternatively, we can derive this equation using calculus. Here,

$\begin{array}{l}\mathbf{v}=\frac{đ\mathbf{r}}{đt}\\ ⇒đ\mathbf{r}=\mathbf{v}đt\end{array}$

Integrating between the limits on both sides,

$\begin{array}{l}\int đ\mathbf{r}=\int \mathbf{v}đt\end{array}$

Now substituting v ,

$\begin{array}{l}⇒\int đ\mathbf{r}=\int \left(\mathbf{u}+\mathbf{a}t\right)đt\\ ⇒\Delta \mathbf{r}=\int \mathbf{u}t+\int \mathbf{a}tđt\\ ⇒\mathbf{s}=\Delta \mathbf{r}={\mathbf{r}}_{2}-{\mathbf{r}}_{1}=\mathbf{u}t+\frac{1}{2}\mathbf{a}{t}^{2}\end{array}$

The expression for the displacement has two terms : one varies linearly ( u t) with the time and the other ( $\frac{1}{2}\mathbf{a}{t}^{2}$ ) varies with the square of time. The first term is equal to the displacement due to non-accelerated motion i.e the displacement when the particle moves with uniform velocity, u . The second term represents the contribution of the acceleration (change in velocity) towards displacement.

This equation is used for determining either displacement(Δ r ) or position( ${\mathbf{r}}_{1}$ ). A common simplification, used widely, is to consider beginning of motion as the origin of coordinate system so that

pls explain what is dimension of 1in length and -1 in time ,what's is there difference between them
what are scalars
show that 1w= 10^7ergs^-1
what's lamin's theorems and it's mathematics representative
if the wavelength is double,what is the frequency of the wave
What are the system of units
A stone propelled from a catapult with a speed of 50ms-1 attains a height of 100m. Calculate the time of flight, calculate the angle of projection, calculate the range attained
58asagravitasnal firce
Amar
water boil at 100 and why
what is upper limit of speed
what temperature is 0 k
Riya
0k is the lower limit of the themordynamic scale which is equalt to -273 In celcius scale
Mustapha
How MKS system is the subset of SI system?
which colour has the shortest wavelength in the white light spectrum
if x=a-b, a=5.8cm b=3.22 cm find percentage error in x
x=5.8-3.22 x=2.58
what is the definition of resolution of forces
what is energy?
Ability of doing work is called energy energy neither be create nor destryoed but change in one form to an other form
Abdul
motion
Mustapha
highlights of atomic physics
Benjamin By By Anh Dao By Sheila Lopez By OpenStax By Rhodes By Dionne Mahaffey By OpenStax By Yacoub Jayoghli By JavaChamp Team By Anh Dao