<< Chapter < Page Chapter >> Page >
Using the MSP-EXP430FG4618 Development Tool implement a flash memory programming with the CPU executing the code in the flash memory.

Laboratory flash memory: lab1 - flash memory programming with the cpu executing the code from flash memory

Introduction

The TI MSP430 has an internal flash memory that can be used for data storage. Two different methods of writing to the flash memory are studied in this laboratory. The first method requires the CPU execution of the code resident in flash memory. The consequences of this procedure are discussed. In the second part of the laboratory, the flash write and erase operations are conducted with the CPU executing the code resident in RAM. The important details are highlighted.

Overview

This laboratory programs the internal flash memory with the CPU executing the code resident in flash memory. It requires to configure: - Flash memory controller; - Segment erase routine; and the - Flash write routine. The execution time of the different operations can be obtained with an oscilloscope connected on pin 2 of the Header 4 or analyzing the state of the LED (digital output P2.1).

Resources

This laboratory uses the flash memory controller. The operation of this device is monitored using a digital output port (P2.1).

The project must be compiled using the files ( Lab1_Flash.c )and the command file lnk_msp430fg4618.cmd.

The code is resident in the flash memory, so whenever a flash write or erase operation occurs, the CPU access to this memory is automatically inhibited.

Software application organization

The software begins by disabling the Watchdog Timer. Then, port P2.1 is set as an output with a logic low level.

The flash memory controller is configured with the clock MCLK divided by 3. Thus the fFTG operating frequency lies within the specified limits of 257 kHz to 476 kHz.

A set of routines are provided to erase, write and copy the contents of a segment. The main tasks related to the flash memory handling are presented using this set of routines.

The information Segments A and B are erased first. Then, bytes are written to SegmentA and words are written to SegmentB. The contents of the information memory SegmentA are copied to the information SegmentB, overwriting the previous contents.

System configuration

Flash memory controller configuration

Configure the register FCTL2 to use clock MCLK divided by 3. Do not forget to enter the password to access the register.

FCTL2 = FWKEY | FSSEL0 | FN1; // MCLK/3 for Flash Timing Generator

Segment erase routine

Configure the registers FCTL1 and FCTL3 in order to initiate the flash segment erase process by writing an address belonging to the segment to be erased. Be sure to include the password to access the register.

FCTL1 = FWKEY | ERASE; // Set Erase bit FCTL3 = FWKEY; // Clear Lock bit

Block flash write and erase operations are carried out after erasing the segment:

//Flash block write and erase operations after erasing the segment: FCTL3 = FWKEY | LOCK; // Set LOCK bit

Flash write routine

Configure the registers in order to start writing to the flash memory. Be sure to include the password to access the register.

FCTL1 = FWKEY | ERASE; // Set Erase bit FCTL3 = FWKEY; // Clear Lock bit

Configure flash block write and erase operations and disable the write bit:

// Flash block write and erase operations and disable the write bit // after the writing process to the segment:FCTL3 = FWKEY | LOCK; // Set LOCK bit

Analysis of operation

Execution time for the information segments erase operation

Put the cursor at line of code 124, located just after the second port P2.1 switching state. Execute the software until the cursor position is reached. The erase operation timing can be seen on an oscilloscope with the probe connected to pin 2 of the Header 4.

Bytes write in the information memory a

The routine write_char_flash allows writing a byte to flash memory. It receives the memory address where the byte should be stored.

Open the memory window, and add the address of the information memory A. The content of this address becomes visible after ordering its rendering . As we are writing a byte to flash, we must change the presentation of the memory contents. Choose the option Column Size 1 , from the context menu of the memory window, through the option Format .

Now, during the execution of the for loop, the flash contents is written sequentially.

Bytes written in the information b memory

This routine is similar to the previous one. Note that now the flash write address is increased by two because a word occupies two bytes of memory.

The information is more readily observed when the memory contents display mode is restored to its initial state. Reset the default conditions in the option Format of the context menu.

Copy the contents of the information a memory to information b memory

The output port P2.1 is enabled before the copy process begins. The copy routine receives the start address of the source information segment and the start address of the destination information segment. The information is then successively read and written from one segment to another.

Port P2.1 is disabled at the end of the copy process. Thus, the task execution time can be measured using an oscilloscope.

This example and many others are available on the MSP430 Teaching ROM.

Request this ROM, and our other Teaching Materials here (External Link)

Questions & Answers

Is there any normative that regulates the use of silver nanoparticles?
Damian Reply
what king of growth are you checking .?
Renato
What fields keep nano created devices from performing or assimulating ? Magnetic fields ? Are do they assimilate ?
Stoney Reply
why we need to study biomolecules, molecular biology in nanotechnology?
Adin Reply
?
Kyle
yes I'm doing my masters in nanotechnology, we are being studying all these domains as well..
Adin
why?
Adin
what school?
Kyle
biomolecules are e building blocks of every organics and inorganic materials.
Joe
anyone know any internet site where one can find nanotechnology papers?
Damian Reply
research.net
kanaga
sciencedirect big data base
Ernesto
Introduction about quantum dots in nanotechnology
Praveena Reply
what does nano mean?
Anassong Reply
nano basically means 10^(-9). nanometer is a unit to measure length.
Bharti
do you think it's worthwhile in the long term to study the effects and possibilities of nanotechnology on viral treatment?
Damian Reply
absolutely yes
Daniel
how to know photocatalytic properties of tio2 nanoparticles...what to do now
Akash Reply
it is a goid question and i want to know the answer as well
Maciej
characteristics of micro business
Abigail
for teaching engĺish at school how nano technology help us
Anassong
Do somebody tell me a best nano engineering book for beginners?
s. Reply
there is no specific books for beginners but there is book called principle of nanotechnology
NANO
what is fullerene does it is used to make bukky balls
Devang Reply
are you nano engineer ?
s.
fullerene is a bucky ball aka Carbon 60 molecule. It was name by the architect Fuller. He design the geodesic dome. it resembles a soccer ball.
Tarell
what is the actual application of fullerenes nowadays?
Damian
That is a great question Damian. best way to answer that question is to Google it. there are hundreds of applications for buck minister fullerenes, from medical to aerospace. you can also find plenty of research papers that will give you great detail on the potential applications of fullerenes.
Tarell
what is the Synthesis, properties,and applications of carbon nano chemistry
Abhijith Reply
Mostly, they use nano carbon for electronics and for materials to be strengthened.
Virgil
is Bucky paper clear?
CYNTHIA
carbon nanotubes has various application in fuel cells membrane, current research on cancer drug,and in electronics MEMS and NEMS etc
NANO
so some one know about replacing silicon atom with phosphorous in semiconductors device?
s. Reply
Yeah, it is a pain to say the least. You basically have to heat the substarte up to around 1000 degrees celcius then pass phosphene gas over top of it, which is explosive and toxic by the way, under very low pressure.
Harper
Do you know which machine is used to that process?
s.
how to fabricate graphene ink ?
SUYASH Reply
for screen printed electrodes ?
SUYASH
What is lattice structure?
s. Reply
of graphene you mean?
Ebrahim
or in general
Ebrahim
in general
s.
Graphene has a hexagonal structure
tahir
On having this app for quite a bit time, Haven't realised there's a chat room in it.
Cied
what is biological synthesis of nanoparticles
Sanket Reply
how did you get the value of 2000N.What calculations are needed to arrive at it
Smarajit Reply
Privacy Information Security Software Version 1.1a
Good
Got questions? Join the online conversation and get instant answers!
Jobilize.com Reply

Get the best Algebra and trigonometry course in your pocket!





Source:  OpenStax, Teaching and classroom laboratories based on the “ez430” and "experimenter's board" msp430 microcontroller platforms and code composer essentials. OpenStax CNX. May 19, 2009 Download for free at http://cnx.org/content/col10706/1.3
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Teaching and classroom laboratories based on the “ez430” and "experimenter's board" msp430 microcontroller platforms and code composer essentials' conversation and receive update notifications?

Ask