<< Chapter < Page Chapter >> Page >
Two pictures are shown labeled a and b. Picture a depicts a clear, colorless solution in a plastic bag being held in a person’s hand. Picture b shows a person’s hand holding a detection meter with a digital readout screen while another hand holds someone’s finger up to the end of the meter. The meter is pressed to the drop of blood that is at the end of the person’s finger.
“Mixed” mass-volume units are commonly encountered in medical settings. (a) The NaCl concentration of physiological saline is 0.9% (m/v). (b) This device measures glucose levels in a sample of blood. The normal range for glucose concentration in blood (fasting) is around 70–100 mg/dL. (credit a: modification of work by “The National Guard”/Flickr; credit b: modification of work by Biswarup Ganguly)

Parts per million and parts per billion

Very low solute concentrations are often expressed using appropriately small units such as parts per million (ppm)    or parts per billion (ppb)    . Like percentage (“part per hundred”) units, ppm and ppb may be defined in terms of masses, volumes, or mixed mass-volume units. There are also ppm and ppb units defined with respect to numbers of atoms and molecules.

The mass-based definitions of ppm and ppb are given here:

ppm = mass solute mass solution × 10 6 ppm ppb = mass solute mass solution × 10 9 ppb

Both ppm and ppb are convenient units for reporting the concentrations of pollutants and other trace contaminants in water. Concentrations of these contaminants are typically very low in treated and natural waters, and their levels cannot exceed relatively low concentration thresholds without causing adverse effects on health and wildlife. For example, the EPA has identified the maximum safe level of fluoride ion in tap water to be 4 ppm. Inline water filters are designed to reduce the concentration of fluoride and several other trace-level contaminants in tap water ( [link] ).

Two pictures are shown labeled a and b. Picture a is a close-up shot of water coming out of a faucet. Picture b shows a machine with the words, “Filtered Water Dispenser.” This machine appears to be inside a refrigerator.
(a) In some areas, trace-level concentrations of contaminants can render unfiltered tap water unsafe for drinking and cooking. (b) Inline water filters reduce the concentration of solutes in tap water. (credit a: modification of work by Jenn Durfey; credit b: modification of work by “vastateparkstaff”/Wikimedia commons)

Calculation of parts per million and parts per billion concentrations

According to the EPA, when the concentration of lead in tap water reaches 15 ppb, certain remedial actions must be taken. What is this concentration in ppm? At this concentration, what mass of lead (μg) would be contained in a typical glass of water (300 mL)?

Solution

The definitions of the ppm and ppb units may be used to convert the given concentration from ppb to ppm. Comparing these two unit definitions shows that ppm is 1000 times greater than ppb (1 ppm = 10 3 ppb). Thus:

15 ppb × 1 ppm 10 3 ppb = 0.015 ppm

The definition of the ppb unit may be used to calculate the requested mass if the mass of the solution is provided. However, only the volume of solution (300 mL) is given, so we must use the density to derive the corresponding mass. We can assume the density of tap water to be roughly the same as that of pure water (~1.00 g/mL), since the concentrations of any dissolved substances should not be very large. Rearranging the equation defining the ppb unit and substituting the given quantities yields:

ppb = mass solute mass solution × 10 9 ppb mass solute = ppb × mass solution 10 9 ppb mass solute = 15 ppb × 300 mL × 1.00 g mL 10 9 ppb = 4.5 × 10 −6 g

Finally, convert this mass to the requested unit of micrograms:

4.5 × 10 −6 g × 1 μg 10 −6 g = 4.5 μg

Check your learning

A 50.0-g sample of industrial wastewater was determined to contain 0.48 mg of mercury. Express the mercury concentration of the wastewater in ppm and ppb units.

Answer:

9.6 ppm, 9600 ppb

Got questions? Get instant answers now!

Section summary

In addition to molarity, a number of other solution concentration units are used in various applications. Percentage concentrations based on the solution components’ masses, volumes, or both are useful for expressing relatively high concentrations, whereas lower concentrations are conveniently expressed using ppm or ppb units. These units are popular in environmental, medical, and other fields where mole-based units such as molarity are not as commonly used.

Consider this question: What mass of a concentrated solution of nitric acid (68.0% HNO 3 by mass) is needed to prepare 400.0 g of a 10.0% solution of HNO 3 by mass?

(a) Outline the steps necessary to answer the question.

(b) Answer the question.

(a) The dilution equation can be used, appropriately modified to accommodate mass-based concentration units:
% mass 1 × mass 1 = % mass 2 × mass 2
This equation can be rearranged to isolate mass 1 and the given quantities substituted into this equation.
(b) 58.8 g

Got questions? Get instant answers now!

What mass of a 4.00% NaOH solution by mass contains 15.0 g of NaOH?

Got questions? Get instant answers now!

What mass of solid NaOH (97.0% NaOH by mass) is required to prepare 1.00 L of a 10.0% solution of NaOH by mass? The density of the 10.0% solution is 1.109 g/mL.

114 g

Got questions? Get instant answers now!

What mass of HCl is contained in 45.0 mL of an aqueous HCl solution that has a density of 1.19 g cm –3 and contains 37.21% HCl by mass?

Got questions? Get instant answers now!

The hardness of water (hardness count) is usually expressed in parts per million (by mass) of CaCO 3 , which is equivalent to milligrams of CaCO 3 per liter of water. What is the molar concentration of Ca 2+ ions in a water sample with a hardness count of 175 mg CaCO 3 /L?

1.75 × 10 −3 M

Got questions? Get instant answers now!

The level of mercury in a stream was suspected to be above the minimum considered safe (1 part per billion by weight). An analysis indicated that the concentration was 0.68 parts per billion. Assume a density of 1.0 g/mL and calculate the molarity of mercury in the stream.

Got questions? Get instant answers now!

In Canada and the United Kingdom, devices that measure blood glucose levels provide a reading in millimoles per liter. If a measurement of 5.3 m M is observed, what is the concentration of glucose (C 6 H 12 O 6 ) in mg/dL?

95 mg/dL

Got questions? Get instant answers now!

A throat spray is 1.40% by mass phenol, C 6 H 5 OH, in water. If the solution has a density of 0.9956 g/mL, calculate the molarity of the solution.

Got questions? Get instant answers now!

Copper(I) iodide (CuI) is often added to table salt as a dietary source of iodine. How many moles of CuI are contained in 1.00 lb (454 g) of table salt containing 0.0100% CuI by mass?

2.38 × 10 −4 mol

Got questions? Get instant answers now!

A cough syrup contains 5.0% ethyl alcohol, C 2 H 5 OH, by mass. If the density of the solution is 0.9928 g/mL, determine the molarity of the alcohol in the cough syrup.

Got questions? Get instant answers now!

D5W is a solution used as an intravenous fluid. It is a 5.0% by mass solution of dextrose (C 6 H 12 O 6 ) in water. If the density of D5W is 1.029 g/mL, calculate the molarity of dextrose in the solution.

0.29 mol

Got questions? Get instant answers now!

Find the molarity of a 40.0% by mass aqueous solution of sulfuric acid, H 2 SO 4 , for which the density is 1.3057 g/mL.

Got questions? Get instant answers now!

Key equations

  • Percent by mass = mass of solute mass of solution × 100
  • ppm = mass solute mass solution × 10 6 ppm
  • ppb = mass solute mass solution × 10 9 ppb
Practice Key Terms 5

Get Jobilize Job Search Mobile App in your pocket Now!

Get it on Google Play Download on the App Store Now




Source:  OpenStax, Chemistry. OpenStax CNX. May 20, 2015 Download for free at http://legacy.cnx.org/content/col11760/1.9
Google Play and the Google Play logo are trademarks of Google Inc.

Notification Switch

Would you like to follow the 'Chemistry' conversation and receive update notifications?

Ask